Scion TC 2007-2010 Printer Friendly Wiring Chart

Scion TC 2007-2010

PART	COLOR	LOCATION
12 VOLT CONSTANT	RED (+)	@ IGNITION SWITCH, (WHITE, 8-PIN PLUG), PIN 7
STARTER	BLACK (+)	@ IGNITION SWITCH, (WHITE, 8-PIN PLUG), PIN 8
STARTER 2	GREEN (+)	@ IGNITION SWITCH, (WHITE, 8-PIN PLUG), PIN 1
IGNITION 1	BLUE (+)	@ IGNITION SWITCH, (WHITE, 8-PIN PLUG), PIN 6
IGNITION 2	YELLOW (+)	@ IGNITION SWITCH, (WHITE, 8-PIN PLUG), PIN 4
IGNITION 3	N/A
ACCESSORY/HEATER BLOWER 1	GRAY (+)	@ IGNITION SWITCH, (WHITE, 8-PIN PLUG), PIN 3
ACCESSORY/HEATER BLOWER 2	N/A
KEYSENSE	N/A
PARKING LIGHTS ( - )	BROWN (-)	@ HEADLIGHT Switch, (WHITE, 17-PIN PLUG), PIN 14
PARKING LIGHTS ( + )	BROWN (+)	@ DASH FUSE BOX, (WHITE, 30-PIN PLUG(A), PIN 29
POWER LOCK	RED to GRAY (TYPE B), NOTE #2	in DRIVERS KICK PANEL, (WHITE, 20-PIN PLUG), PIN 19
POWER UNLOCK	PINK to PURPLE (TYPE B), NOTE #3	in DRIVERS KICK PANEL, (WHITE, 20-PIN PLUG), PIN 18
DOOR TRIGGER	ORANGE (-)	@ DASH FUSE BOX, (WHITE, 30-PIN PLUG(A), PIN 21
DOMELIGHT SUPERVISION	BLUE (-)	@ DASH FUSE BOX, (WHITE, 6-PIN PLUG(K), PIN 2
TRUNK RELEASE	ORANGE (-) NOTE #4	in DRIVERS KICK PANEL, (GRAY, 12-PIN PLUG), PIN 12
SLIDING POWER DOOR	N/A
HORN	WHITE (-)	@ HORN Switch or DASH FUSE BOX, (WHITE, 32-PIN PLUG(E), PIN 25
TACH	BLACK (AC)	@ DATA LINK Connector, (WHITE, 16-PIN PLUG), PIN 9, Under Drivers Dash
WAIT TO START LIGHT	N/A
BRAKE	BLUE (+)	@ BRAKE PEDAL Switch or DASH FUSE BOX, (WHITE, 30-PIN PLUG(A), PIN 9
FACTORY ALARM DISARM	PURPLE to PINK (-) NOTE #5	in DRIVERS KICK PANEL, (WHITE, 20-PIN PLUG), PIN 14
ANTI-THEFT	SCION'S TRANSPONDER ANTI-THEFT SYSTEM, See NOTE #1	TRANSPONDER @ IGNITION SWITCH TUMBLER

EXTRA INFORMATION

NOTE #1: TOYOTA'S TRANSPONDER SYSTEM, Requires Bypass Module: (For Remote Starting Only) Part #791 Bypass, (Requires Extra Key) for Operation. (For Remote Starting Only) Part # PK-ALL Bypass. (No Extra Key Required for Operation) 2-KEYS Required to Program Module. To order please go to the SECURITY BYPASS MODULE Page or INTERFACE BYPASS MODULE Page on this website. NOTE #2: this wire is only needed if the Door Locks do not function with the Aftermarket System while the vehicle is running. All other times just use the Factory Alarm Arm wire, Green to Blue(DRIVERS KICK PANEL, 20PIN PLUG, PIN 15) Test wire by turning key in drivers door lock NOTE #3: this wire is only needed if the Door Locks do not function with the Aftermarket System while the vehicle is running. All other times just use the Factory Alarm Disarm wire,Purple to Pink(DRIVERS KICK PANEL, 20PIN PLUG, PIN 14) REQUIRES DOUBLE PULSE, Test wire by turning key in drivers door. NOTE #4: TEST this wire while Opening the Hatch with the Handle on the REAR of the Vehicle. NOTE #5: TEST this wire while turning the Key in the Drivers Door, this wire will also Unlock the doors.