Mercedes Benz  C 230 1997-
 PART   COLOR  LOCATION
 12 VOLT CONSTANT   RED (+)   @ IGNITION SWITCH HARNESS, See NOTE #1
 STARTER  PURPLE (+)  @ IGNITION SWITCH HARNESS, See NOTE #1
 STARTER 2  N/A  
 IGNITION 1  PINK/RED (+)  @ IGNITION SWITCH HARNESS, See NOTE #1
 IGNITION 2  PINK/GREEN (+) (2nd ACCESSORY)  @ IGNITION SWITCH HARNESS, See NOTE #1
 IGNITION 3  N/A  
 ACCESSORY/HEATER BLOWER 1  PINK/YELLOW (+)  @ IGNITION SWITCH HARNESS, See NOTE #1
 ACCESSORY/HEATER BLOWER 2  N/A  
 KEYSENSE  N/A  
 PARKING LIGHTS ( - )  N/A  
 PARKING LIGHTS ( + )  GRAY (+) and GRAY/WHITE (+) Use both, See NOTE #2  @ HEADLIGHT SWITCH or below FUSE BOX, See DIAGRAM
 POWER LOCK  BLACK (-), TYPE B  IN EITHER KICK PANEL, See NOTE #3
 POWER UNLOCK  BLUE (-), TYPE B  IN EITHER KICK PANEL, See NOTE #3
 DOOR TRIGGER  BROWN/GRAY (-) and BROWN/GRAY/YELLOW (-) USE BOTH, See NOTE #4  @ PASSENGERS PIN SWITCHES or THEFT MODULE
 DOMELIGHT SUPERVISION  BROWN/GRAY (-)  @ PASSENGER DOOR PIN SWITCH
 TRUNK RELEASE  N/A  
 SLIDING POWER DOOR  N/A  
 HORN  N/A  
 TACH  GREEN/YELLOW, (AC)  @ Connector LEFT of BRAKE PEDAL
 WAIT TO START LIGHT  N/A  
 BRAKE  BLACK/RED (+)  @ BRAKE PEDAL SWITCH
 FACTORY ALARM DISARM   DISARMS with UNLOCK!!  
 ANTI-THEFT  N/A  
 EXTRA INFORMATION
 NOTE #1: the IGNITION HARNESS is accessible at the BOTTOM of the FUSE BOX, pull the fuse box up into the cowling area to get at the wire harness. NOTE: use the PURPLE/GREEN (+) wire to bypass the Factory Starter Kill for Remote Starter Installation. NOTE #2: this vehicle has 2 Parking Light wires, it will require 2 extra Relays part #775, to connect, See DIAGRAM. NOTE #3: on base vehicles WITHOUT a FACTORY ALARM, the Lock and Unlock wires when using IGNITION CONTROLLED DOOR LOCKS will cause the Factory Starter Kill to engage. DO NOT USE the IGNITION CONTROLLED DOOR LOCKING programs on this vehicle. NOTE #4: this vehicle has 2 DOOR TRIGGER wires, when connecting to an ALARM SYSTEM use both DOOR TRIGGER wires and DIODE ISOLATE, to connect, See DIAGRAM.