Mazda Mazda 5 2012- Printer Friendly Wiring Chart

Mazda Mazda 5 2012-

PART	COLOR	LOCATION
12 VOLT CONSTANT	BLUE/BLACK (+)	8-PIN PLUG, PIN H @ IGNITION SWITCH
STARTER	BLUE/RED (+)	8-PIN PLUG, PIN B @ IGNITION SWITCH
STARTER 2	N/A
IGNITION 1	BLUE (+)	8-PIN PLUG, PIN A @ IGNITION SWITCH
IGNITION 2	N/A
IGNITION 3	N/A
ACCESSORY/HEATER BLOWER 1	BLACK/RED (+)	8-PIN PLUG, PIN D @ IGNITION SWITCH
ACCESSORY/HEATER BLOWER 2	BLACK/WHITE (+)	8-PIN PLUG, PIN F @ IGNITION SWITCH
KEYSENSE	N/A
PARKING LIGHTS ( - )	BROWN/RED (-)	HEADLIGHT SWITCH or BLUE 24-PIN PLUG(2), PIN V @ BCM, See NOTE #2
PARKING LIGHTS ( + )	BLUE/BLACK (+)	in PASSENGER KICK, harness to REAR of vehicle
POWER LOCK	BLUE (TYPE B) (-) Negative, See NOTE #3	in EITHER KICK or WHITE 24-PIN PLUG(6) PIN D, See NOTE #2
POWER UNLOCK	use LOCK wire
DOOR TRIGGER	WHITE/BLUE (-) N.C.	in EITHER KICK or WHITE 24-PIN PLUG(6) PIN G, See NOTE #2
DOMELIGHT SUPERVISION	YELLOW/BLACK (-)	in PASSENGER KICK or WHITE 16-PIN PLUG(5) PIN N, See NOTE #2
TRUNK RELEASE	PURPLE/YELLOW (-)	in PASSENGER KICK or WHITE 24-PIN PLUG(6) PIN O, See NOTE #2
SLIDING POWER DOOR	N/A
HORN	PURPLE/WHITE (-)	HORN SWITCH or BLUE 24-PIN PLUG(2) PIN U @ BCM, See NOTE #2
TACH	BLACK/ORANGE, BLACK/WHITE, BLACK/BLUE or BLACK/YELLOW (AC)	@ Any FUEL-INJECTOR, 2-PIN PLUG, PIN A
WAIT TO START LIGHT	N/A
BRAKE	RED/YELLOW (+)	@ BRAKE PEDAL SWITCH, 4-PIN PLUG, PIN D
FACTORY ALARM DISARM	Disarms with INTERFACE MODULE
ANTI-THEFT	See NOTE #1

EXTRA INFORMATION

NOTE #1: This vehicle requires a INTERFACE BYPASS MODULE Part # DB-ALL for REMOTE START and for KEYLESS ENTRY Operation, to order go to the INTERFACE BYPASS MODULE PAGE on this website. NOTE #2: The BCM is located behind the GLOVE BOX. NOTE #3; To do KEYLESS ENTRY on this vehicle will require the INTERFACE BYPASS MODULE DB-ALL to order go to the INTERFACE BYPASS MODULE Page on this website.