Mazda  Mazda 2 2011-
 PART   COLOR  LOCATION
 12 VOLT CONSTANT   RED (+)   WHITE 6-PIN PLUG, PIN E @ IGNITION SWITCH
 STARTER  BLACK/BLUE (+)  WHITE 6-PIN PLUG, PIN C @ IGNITION SWITCH
 STARTER 2  N/A  
 IGNITION 1  BLACK/YELLOW (+)  WHITE 6-PIN PLUG, PIN D @ IGNITION SWITCH
 IGNITION 2  N/A  
 IGNITION 3  N/A  
 ACCESSORY/HEATER BLOWER 1  BLACK/RED (+)  WHITE 6-PIN PLUG, PIN A @ IGNITION SWITCH
 ACCESSORY/HEATER BLOWER 2  BLACK/WHITE (+)  WHITE 6-PIN PLUG, PIN B @ IGNITION SWITCH
 KEYSENSE  BLUE/BLACK (+)  WHITE 2-PIN PLUG, PIN B @ IGNITION KEY SWITCH
 PARKING LIGHTS ( - )  BROWN/WHITE (-)  @ HEADLIGHT SWITCH or BCM, WHITE 24-PIN PLUG(E), PIN J, See NOTE #2
 PARKING LIGHTS ( + )  GRAY/BLACK (+)  GRAY 16-PIN PLUG(C), PIN H @ BCM, See NOTE #2
 POWER LOCK  PINK (TYPE B)  DOOR LOCK SWITCH or GRAY 24-PIN PLUG(F), PIN P @ BCM, See NOTE #2
 POWER UNLOCK  USE LOCK WIRE!  
 DOOR TRIGGER  BLACK/ORANGE (-)  GRAY 24-PIN PLUG(F), PIN I @ BCM, See NOTE #2
 DOMELIGHT SUPERVISION  YELLOW/BLACK (-)  GRAY 16-PIN PLUG(C), PIN I @ BCM, See NOTE #2
 TRUNK RELEASE  USE TRUNK RELEASE MOTOR!!  
 SLIDING POWER DOOR  N/A  
 HORN  PURPLE/RED (-)  @ HORN SWITCH or BCM, WHITE 16-PIN PLUG(B), PIN K, See NOTE #2
 TACH  RED, RED/YELLOW, RED/BLACK or RED/WHITE (AC)  GRAY 2-PIN PLUG, PIN B @ ANY FUEL-INJECTOR
 WAIT TO START LIGHT  N/A  
 BRAKE  GREEN/YELLOW (+)  @ BRAKE PEDAL SWITCH or in DRIVERS KICK PANEL, Harness to Rear of Vehicle
 FACTORY ALARM DISARM   GREEN (-)  GRAY 24-PIN PLUG(F), PIN C @ BCM, See NOTE #2
 ANTI-THEFT  MAZDA'S TRANSPONDER ANTI-THEFT SYSTEM, See NOTE #1  @ IGNITION SWITCH TUMBLER
 EXTRA INFORMATION
 NOTE #1: This vehicle is with MAZDA'S TRANSPONDER ANTI-THEFT SYSTEM, for REMOTE STARTING ONLY you will need the Part #791 BYPASS Module and an Extra Ignition key. (Requires extra key for Operation) Part # PK-ALL or PKFM for REMOTE STARTING ONLY, requires 2 keys for programming, NO key required for Operation. Part # DB-ALL for Remote Starting and Keyless Entry operation (no resistors required), 2 keys required for programming, no key required for Operation. To Order the go to the SECURITY BYPASS MODULE Page or INTERFACE BYPASS MODULE Page on this website. NOTE #2; The BCM is located behind the GLOVEBOX