Mazda  B2300, B3000, B4000 1998-
 PART   COLOR  LOCATION
 12 VOLT CONSTANT   YELLOW (+)   @ IGNITION SWITCH HARNESS
 STARTER  RED/LIGHT BLUE (+)  @ IGNITION SWITCH HARNESS
 STARTER 2  N/A  
 IGNITION 1  LIGHT GREEN/PURPLE (+)  @ IGNITION SWITCH HARNESS
 IGNITION 2  BLACK/GREEN (+)  
 IGNITION 3  N/A  
 ACCESSORY/HEATER BLOWER 1  GRAY/YELLOW (+) (2 Wires use only 1)  @ IGNITION SWITCH HARNESS
 ACCESSORY/HEATER BLOWER 2  N/A  @ IGNITION SWITCH HARNESS
 KEYSENSE  N/A  
 PARKING LIGHTS ( - )  N/A  
 PARKING LIGHTS ( + )  BROWN (+)  IN DRIVERS KICK PANEL
 POWER LOCK  PINK/YELLOW (TYPE B)  IN EITHER DOOR HARNESS
 POWER UNLOCK  PINK/GREEN (TYPE B)  IN EITHER DOOR HARNESS
 DOOR TRIGGER  SEE NOTE #1  SEE DIAGRAM
 DOMELIGHT SUPERVISION  BLACK/LIGHT BLUE (+), Requires Part #775 Relay  IN DRIVERS KICK PANEL
 TRUNK RELEASE  N/A  
 SLIDING POWER DOOR  N/A  
 HORN  YELLOW/LIGHT GREEN (-)  @ STEERING COLUMN HARNESS
 TACH  TAN/WHITE (AC)  @ IGNITION COIL
 WAIT TO START LIGHT  N/A  
 BRAKE  LIGHT GREEN (+)  IN DRIVERS KICK PANEL
 FACTORY ALARM DISARM   DARK GREEN/PURPLE (-)  IN DRIVERS KICK PANEL
 ANTI-THEFT  N/A  
 EXTRA INFORMATION
 NOTE #1: THIS VEHICLES DOOR TRIGGERS REQUIRE EXTRA PARTS (DIODES) AND A SPECIAL WIRING DIAGRAM. USE YELLOW/BLACK (-) FOR THE DRIVERS DOOR FOUND IN DRIVERS DOOR HARNESS. USE GRAY/RED (-) FOR THE PASSENGER DOOR TRIGGER FOUND IN PASSENGER DOOR HARNESS. WHEN CONNECTING TO AN ALARM SYSTEM USE BOTH DOOR TRIGGER WIRES AND DIODE ISOLATE, TO CONNECT, SEE DIAGRAM