NOTE #1: LEXUS TRANSPONDER ANTI-THEFT SYSTEM, Requires Bypass Module,
Part # 791 Bypass Module (for REMOTE STARTING ONLY!) an Extra Ignition key is
required to be placed inside this module for Operation.
Part # PK-ALL Bypass Module (for REMOTE STARTING ONLY!) KEYLESS BYPASS
NO KEY is required for Operation.
To order the Bypass Module go to the INTERFACE BYPASS MODULE Page on this
website
NOTE #2: The PSC (Power Source Control) ECU is located BEHIND the GLOVEBOX.
NOTE #3: This plug is on the side of the FUSEBOX facing the firewall.
NOTE #4: To connect up (+) Positive Parking lights will require (2) extra Relays Part #775. The BLUE (+) wire controls the FRONT Parking Lights and is located at the DRIVERS SIDE HEADLIGHT and the BROWN (+) wire is for the REAR Parking lights and is located at the DRIVERS SIDE FUSE BOX, GRAY 30-Pin Plug, Pin 24.
NOTE #5: TEST the LOCK and UNLOCK wires while turning the Key in the DRIVERS DOOR KEY CYLINDER.
NOTE #6: The DRIVERS DOOR is a WHITE to RED (-) at the BECU (Right Hand), 16-Pin Plug, Pin 14. The PASSENGER DOOR is a BLACK to ORANGE (-) at the BECU (Right Hand) 28-Pin Plug, Pin 23. The DRIVERS REAR DOOR is a BROWN to ORANGE(-) at the PASSENGER SIDE FUSEBOX, 28-Pin Plug facing firewall, Pin 11. And the PASSENGER REAR DOOR is ORANGE(-) at the BECU (Right Hand), 16-Pin Plug, Pin 16. When connecting to an ALARM SYSTEM use all 4 wires and DIODE ISOLATE, See DIAGRAM.
NOTE #7: The BODY ECU (Right Hand) is attached to the PASSENGER SIDE FUSE BOX behind the GLOVE BOX, the BODY ECU (Left Hand) is attached to the DRIVERS SIDE FUSE BOX under the DRIVERS SIDE of DASH.
|