Jeep  Wrangler 2004-
 PART   COLOR  LOCATION
 12 VOLT CONSTANT   PINK/BLACK (+)   IGNITION SWITCH HARNESS
 STARTER  YELLOW (+)  IGNITION SWITCH HARNESS
 STARTER 2  N/A  
 IGNITION 1  DARK BLUE (+)  IGNITION SWITCH HARNESS
 IGNITION 2  N/A  
 IGNITION 3  N/A  
 ACCESSORY/HEATER BLOWER 1  BLACK/ORANGE (+)  IGNITION SWITCH HARNESS
 ACCESSORY/HEATER BLOWER 2  N/A  
 KEYSENSE  N/A  
 PARKING LIGHTS ( - )  N/A  
 PARKING LIGHTS ( + )  BLACK/YELLOW (+)  @ HEADLIGHT SWITCH
 POWER LOCK  ADD ACTUATORS  TO BOTH DOORS, See DIAGRAM
 POWER UNLOCK  ADD ACTUATORS  TO BOTH DOORS, See DIAGRAM
 DOOR TRIGGER  TAN (-) and TAN/YELLOW(-) use both, See NOTE *1  IN DRIVERS KICK PANEL, GRAY 40 Pin Plug
 DOMELIGHT SUPERVISION  YELLOW (-), Requires Part #775 Relay  @ UNDER DASH LIGHT
 TRUNK RELEASE  N/A  
 SLIDING POWER DOOR  N/A  
 HORN  RED/YELLOW (-)  @ STEERING COLUMN HARNESS
 TACH  any wire NOT DARK GREEN/LIGHT GREEN or DARK GREEN/ORANGE  @ IGNITION COIL
 WAIT TO START LIGHT    
 BRAKE  WHITE/TAN (+)  @ SWITCH ABOVE BRAKE PEDAL
 FACTORY ALARM DISARM   N/A  
 ANTI-THEFT  CHRYSLER'S SENTRY KEY (GRAY KEY ONLY) A TRANSPONDER SYSTEM  TRANSPONDER @ IGNITION SWITCH TUMBLER
 EXTRA INFORMATION
 NOTE *1 the TAN (-) is the DRIVERS DOOR and the TAN/YELLOW (-) is the PASSENGER DOOR. When connecting to an ALARM SYSTEM, use both DOOR TRIGGER wires and DIODE ISOLATE, to connect, See DIAGRAM