Jeep  Grand Cherokee 1996-1998
 PART   COLOR  LOCATION
 12 VOLT CONSTANT   RED/WHITE (+)   IGNITION SWITCH HARNESS
 STARTER  YELLOW (+)  IGNITION SWITCH HARNESS
 STARTER 2  N/A  
 IGNITION 1  DARK BLUE/GRAY (+)  IGNITION SWITCH HARNESS
 IGNITION 2  N/A  
 IGNITION 3  N/A  
 ACCESSORY/HEATER BLOWER 1  BLACK/ORANGE (+) See NOTE *1  IGNITION SWITCH HARNESS
 ACCESSORY/HEATER BLOWER 2  RED/BLACK (+) See NOTE *1  IGNITION SWITCH HARNESS
 KEYSENSE  N/A  
 PARKING LIGHTS ( - )  N/A  
 PARKING LIGHTS ( + )  BLUE/RED (+)  @ HEAD LIGHT SWITCH
 POWER LOCK  ORANGE/VIOLET and PINK/BLACK (TYPE C) See NOTE *2 OR USE A 445TW INTERFACE MODULE TO PURCHASE ,GOOGLE PART NUMBER AND CLICK SHOPPING  IN BOTH FRONT DOORS, See DIAGRAM
 POWER UNLOCK  PINK/BLACK (TYPE C) See NOTE *2 OR USE A 445TW INTERFACE MODULE TO PURCHASE ,GOOGLE PART NUMBER AND CLICK SHOPPING  IN BOTH FRONT DOORS, See DIAGRAM
 DOOR TRIGGER  YELLOW (-)  IN DRIVERS KICK PANEL
 DOMELIGHT SUPERVISION  TURNS ON with DISARM  
 TRUNK RELEASE  ORANGE/BROWN (+), Requires Part #775 Relay  @ HATCH RELEASE SWITCH
 SLIDING POWER DOOR  N/A  
 HORN  GRAY/ORANGE (-)  @ STEERING COLUMN HARNESS
 TACH  GRAY/WHITE  @ PCM, See NOTE *3
 WAIT TO START LIGHT  N/A  
 BRAKE  WHITE/TAN (+)  @ SWITCH ABOVE BRAKE PEDAL
 FACTORY ALARM DISARM   PURPLE/YELLOW (-)  IN DRIVERS DOOR HARNESS
 ANTI-THEFT  N/A  
 EXTRA INFORMATION
 NOTE *1 When installing a Remote Starter, BOTH Accessory #1 and #2 wires MUST BE USED!! NOTE *2 Use ORANGE/VIOLET for LOCK and PINK/BLACK for UNLOCK at the DRIVERS DOOR SWITCH. Use BLACK/WHITE for LOCK and PINK/BLACK for UNLOCK at the passenger front door switch. This vehicle requires (2) of part # 778 one for each door See DIAGRAM. ...To avoid installing the relays use an INTERFACE module part no. 455TW. To locate one, Google 455TW and click shopping. NOTE *3 the PCM (Powertrain Control Module) is located High on the Passenger side firewall.