Infiniti  I30 1999-
 PART   COLOR  LOCATION
 12 VOLT CONSTANT   WHITE/RED (+) or WHITE/PURPLE (+)   IGNITION SWITCH HARNESS
 STARTER  BLACK/YELLOW (+) or BLACK/WHITE (+) See NOTE *1  IGNITION SWITCH HARNESS
 STARTER 2  GREEN/BLACK (+) or RED/BLUE (+) See NOTE *1  IGNITION SWITCH HARNESS
 IGNITION 1  BLACK/WHITE (+) or BLACK/RED (+)  IGNITION SWITCH HARNESS
 IGNITION 2  N/A  
 IGNITION 3  N/A  
 ACCESSORY/HEATER BLOWER 1  RED/YELLOW (+) or RED (+)  IGNITION SWITCH HARNESS
 ACCESSORY/HEATER BLOWER 2  BLUE (+) or WHITE/BLUE (+)  IGNITION SWITCH HARNESS
 KEYSENSE  N/A  
 PARKING LIGHTS ( - )  N/A  
 PARKING LIGHTS ( + )  RED/GREEN (+)  @ HEADLIGHT SWITCH
 POWER LOCK  LIGHT GREEN/RED (TYPE B)  IN DRIVERS DOOR at LOCK SWITCH
 POWER UNLOCK  GREEN/YELLOW (TYPE B) Double Pulse  IN DRIVERS DOOR at LOCK SWITCH
 DOOR TRIGGER  RED/WHITE (-)  LOW IN DRIVER KICK PANEL
 DOMELIGHT SUPERVISION  USE DOOR TRIGGER, Requires Part #775 Relay  
 TRUNK RELEASE  PURPLE/YELLOW (-), Requires Part #775 Relay  LOW IN DRIVER KICK PANEL
 SLIDING POWER DOOR  N/A  
 HORN  GREEN/WHITE (-)  @ STEERING COLUMN
 TACH  WHITE/GREEN (-)  @ ECM, See NOTE *2
 WAIT TO START LIGHT  N/A  
 BRAKE  RED/GREEN (+)  @ SWITCH ABOVE BRAKE PEDAL
 FACTORY ALARM DISARM   DISARMS WITH UNLOCK  
 ANTI-THEFT  TRANSPONDER ANTI-THEFT SYSTEM, REQUIRES 791 BYPASS MODULE AND EXTRA IGNITION KEY  TRANSPONDER @ IGNITION SWITCH TUMBLER
 EXTRA INFORMATION
 NOTE *1 When Installing a REMOTE STARTER, you MUST use BOTH Starter #1 and Starter #2 wires. Both wires must be connected to the STARTER/CRANKING Output wire from the Remote Starter or the vehcile will NOT Remote Start when the Engine is cold. NOTE *2 ECM (ELECTRONIC CONTROL MODULE) IS LOCATED IN THE FRONT OF THE CENETER CONSOLE ON THE TRANSMISSION HUMP . THE WIRING IS EASILY REACHED BY REMOVING THE SMALL BLACK PANEL JUST TO FRONT OF THE CENTER CONSOLE ON THE PASSENGER SIDE THE WIRE IS IN MIDDLE ROW , 7TH ONE FROM THE LEFT