Infiniti G20 1991-1993 Printer Friendly Wiring Chart

Infiniti G20 1991-1993

PART	COLOR	LOCATION
12 VOLT CONSTANT	WHITE (+)	IGNITION SWITCH HARNESS
STARTER	BLACK/WHITE (+) See NOTE *1	IGNITION SWITCH HARNESS
STARTER 2	BLACK/YELLOW (+) See NOTE *1	IGNITION SWITCH HARNESS
IGNITION 1	BLACK/RED (+)	IGNITION SWITCH HARNESS
IGNITION 2	N/A
IGNITION 3	N/A
ACCESSORY/HEATER BLOWER 1	WHITE/BLUE (+)	IGNITION SWITCH HARNESS
ACCESSORY/HEATER BLOWER 2	N/A
KEYSENSE	N/A
PARKING LIGHTS ( - )	N/A
PARKING LIGHTS ( + )	RED/BLUE (+)	@ HEAD LIGHT SWITCH or in DRIVERS KICK PANEL
POWER LOCK	ORANGE/BLACK (TYPE B)	@ HEAVY HARNESS IN DRIVERS KICK PANEL
POWER UNLOCK	ORANGE/BLUE (TYPE B)	@ HEAVY HARNESS IN DRIVERS PANEL
DOOR TRIGGER	RED/WHITE (-)	IN DRIVERS KICK PANEL or at THEFT MODULE, See NOTE *2
DOMELIGHT SUPERVISION	USE DOOR TRIGGER, Requires Part #775 Relay
TRUNK RELEASE	ORANGE (+) or LIGHT GREEN (+), Requires Part #775 Relay	IN DRIVERS KICK PANEL or TRUNK RELEASE SWITCH
SLIDING POWER DOOR	N/A
HORN	GREEN/BLUE (-)	@ THEFT MODULE, See NOTE *2
TACH	BLUE/BLACK (-)	@ ECC Module, to the RIGHT of the Gas Pedal
WAIT TO START LIGHT	N/A
BRAKE	RED/GREEN (+)	@ SWITCH ABOVE BRAKE PEDAL
FACTORY ALARM DISARM	GREEN/YELLOW (-)	@ THEFT MODULE, See NOTE *2
ANTI-THEFT	N/A

EXTRA INFORMATION

NOTE *1 When Installing a REMOTE STARTER, you MUST use BOTH Starter #1 and Starter #2 wires. Both wires must be connected to the STARTER/CRANKING Output wire from the Remote Starter or the vehcile will NOT Remote Start when the Engine is cold. NOTE *2 THE THEFT MODULE IS LOCATED UNDER DASH BY STEERING COLUMN.