Infiniti Fx50 2009-2011 Printer Friendly Wiring Chart

Infiniti Fx50 2009-2011

PART	COLOR	LOCATION
12 VOLT CONSTANT	WHITE (+)	@ BCM, (BLACK, 3-PIN PLUG), PIN 1, NOTE #2
STARTER	LT. BLUE (-)	@ PUSH-BUTTON IGNITION Switch or BCM, (BLACK, 40-PIN PLUG), PIN 18, NOTE #2
STARTER 2	LT. GREEN (-)	@ BCM, (GRAY, 40-PIN PLUG), PIN 21, NOTE #2
IGNITION 1	PINK (+)	@ BCM, (BLACK, 40-PIN PLUG), PIN 11, NOTE #2
IGNITION 2	YELLOW (-)	@ BCM, (GRAY, 40-PIN PLUG), PIN 16, NOTE #2
IGNITION 3	N/A
ACCESSORY/HEATER BLOWER 1	ORANGE (+)	@ BCM, (BLACK, 40-PIN PLUG), PIN 31, NOTE #2
ACCESSORY/HEATER BLOWER 2	ORANGE (+)	@ BCM, (BLACK, 40-PIN PLUG), PIN 24, NOTE #2
KEYSENSE	N/A
PARKING LIGHTS ( - )	N/A
PARKING LIGHTS ( + )	RED (+)	@ FUSE BOX, (WHITE, 10-PIN PLUG), PIN 8
POWER LOCK	PURPLE (TYPE B), NOTE #3	@ POWER WINDOW Main Switch, (WHITE, 16-PIN PLUG), PIN 4
POWER UNLOCK	YELLOW (TYPE B), Requires Double Pulse, NOTE #4	@ POWER WINDOW Main Switch, (WHITE, 16-PIN PLUG), PIN 6
DOOR TRIGGER	GRAY (-)	@ BCM, (GREEN, 40-PIN PLUG), PIN 39, NOTE #2
DOMELIGHT SUPERVISION	LT. BLUE (-)	@ BCM, (WHITE, 16-PIN PLUG), PIN 16, NOTE #2
TRUNK RELEASE	PINK (-) NOTE #5	@ BCM, (GRAY, 40-PIN PLUG), PIN 36, NOTE #2
SLIDING POWER DOOR	N/A
HORN	GREEN (-)	@ HORN Switch, (GRAY, 8-PIN PLUG), PIN 8
TACH	RED (AC)	@ ECM, (GRAY, 32-PIN PLUG), PIN 14,(V6) or PIN 1(V8), NOTE #6
WAIT TO START LIGHT	N/A
BRAKE	PINK (+)	@ BCM, (GREEN, 40-PIN PLUG), PIN 7, NOTE #2
FACTORY ALARM DISARM	Use UNLOCK wire
ANTI-THEFT	INFINITI'S TRANSPONDER ANTI-THEFT SYSTEM, Requires Bypass Module, See NOTE #1

EXTRA INFORMATION

NOTE #1: NISSAN'S TRANSPONDER ANTI-THEFT SYSTEM, Requires Bypass Module, Part # 791 or XK09 (For REMOTE START ONLY) Part # DB-ALL (for REMOTE START and DOOR LOCKS) To order go to the INTERFACE BYPASS MODULE Page on this websie. NOTE #2: the BCM (Body Control Module) is located in the PASSENGER KICK PANEL. NOTE #3: TEST this wire while Turning the KEY in the Drivers Door. This wire will also ARM the FACTORY ALARM. NOTE #4: TEST this wire while Turning the KEY in the Drivers Door. This wire will also DISARM the FACTORY ALARM. NOTE #5: TEST this wire while opening the LIFTGATE with the Handle on the REAR of the Vehicle. NOTE #6; the ECM (Engine Control Module) is located behind the GLOVE BOX.