| PART | COLOR | LOCATION |
| 12 VOLT CONSTANT | BLUE/RED to RED (+) | WHITE 6-PIN PLUG, PIN 1 @ IGNITION SWITCH |
| STARTER | BLUE (+) USE BOTH WIRES | WHITE 6-PIN PLUG, PIN 5 @ IGNITION SWITCH |
| STARTER 2 | PINK (+) FOR REMOTE STARTING!! | WHITE 6-PIN PLUG, PIN 6 @ IGNITION SWITCH |
| IGNITION 1 | BLACK (+) | WHITE 6-PIN PLUG, PIN 3 @ IGNITION SWITCH |
| IGNITION 2 | N/A | |
| IGNITION 3 | N/A | |
| ACCESSORY/HEATER BLOWER 1 | WHITE (+) | WHITE 6-PIN PLUG, PIN 2 @ IGNITION SWITCH |
| ACCESSORY/HEATER BLOWER 2 | N/A | |
| KEYSENSE | BLACK/WHITE (+) Required! | @ IGNITION SWITCH |
| PARKING LIGHTS ( - ) | N/A | |
| PARKING LIGHTS ( + ) | RED to WHITE (+) | WHITE 12-PIN PLUG, PIN 2, in DRIVERS KICK |
| POWER LOCK | PINK (TYPE B), See NOTE #3 | WHITE 16-PIN PLUG, PIN 4 @ POWER WINDOW MAIN SWITCH |
| POWER UNLOCK | ORANGE (TYPE B), Requires Double Pulse, See NOTE #4 | WHITE 16-PIN PLUG, PIN 6 @ POWER WINDOW MAIN SWITCH |
| DOOR TRIGGER | WHITE (-) | WHITE 15-PIN PLUG, PIN 7 @ BCM, See NOTE #2 |
| DOMELIGHT SUPERVISION | PURPLE/WHITE (-) | BLACK 15-PIN PLUG, PIN 8 @ BCM, See NOTE #2 |
| TRUNK RELEASE | YELLOW (-), See NOTE #5 | @ BACK DOOR OPENER, SWITCH in HATCH |
| SLIDING POWER DOOR | N/A | |
| HORN | GREEN/BLACK to LT.BLUE (-) | @ HORN SWITCH in Column |
| TACH | Any wire NOT RED (AC) | @ Any FUEL-INJECTOR |
| WAIT TO START LIGHT | N/A | |
| BRAKE | PINK (+) | @ BRAKE PEDAL SWITCH |
| FACTORY ALARM DISARM | N/A | |
| ANTI-THEFT | INFINITI'S TRANSPONDER ANTI-THEFT SYSTEM, Requires Bypass Module, See NOTE #1 |
| EXTRA INFORMATION |
| NOTE #1 This vehicle is Equipped with a TRANPONDER ANTI-THEFT System that will requires a Bypass Module for REMOTE STARTING: Part # 791 Bypass Module will work IF you have another IGNITION key that you can give up, this key will need to be placed inside the 791 Bypass Module and be left there for Remote Starting. Part # DB-ALL or XK09 is a Keyless Bypass Module used for Remote Starting that DOES NOT require a Key to be left inside the bypass module. To order go to the INTERFACE BYPASS MODULE PAGE on this website. NOTE #2: the BCM (Body Control Module) is located in the DRIVERS KICK PANEL. NOTE #3: TEST this wire while Turning the KEY in the Drivers Door. This wire will also ARM the FACTORY ALARM. NOTE #4: TEST this wire while Turning the KEY in the Drivers Door. This wire will also DISARM the FACTORY ALARM. NOTE #5: TEST this wire while opening the HATCH with the Handle on the REAR of the Vehicle. On vehicles with INTELLIGENT KEY, it is a LT. GREEN (-) located in the DRIVERS KICK PANEL, Harness to REAR of Vehicle. |