Infiniti  Fx35 2009-2011
 PART   COLOR  LOCATION
 12 VOLT CONSTANT   WHITE (+)   @ BCM, (BLACK, 3-PIN PLUG), PIN 1, NOTE #2
 STARTER  LT. BLUE (-)  @ PUSH-BUTTON IGNITION Switch or BCM, (BLACK, 40-PIN PLUG), PIN 18, NOTE #2
 STARTER 2  LT. GREEN (-)  @ BCM, (GRAY, 40-PIN PLUG), PIN 21, NOTE #2
 IGNITION 1  PINK (+)  @ BCM, (BLACK, 40-PIN PLUG), PIN 1, NOTE #2
 IGNITION 2  YELLOW (-)  @ BCM, (GRAY, 40-PIN PLUG), PIN 16, NOTE #2
 IGNITION 3  N/A  
 ACCESSORY/HEATER BLOWER 1  ORANGE (+)  @ BCM, (BLACK, 40-PIN PLUG), PIN 31, NOTE #2
 ACCESSORY/HEATER BLOWER 2  ORANGE (+)  @ BCM, (BLACK, 40-PIN PLUG), PIN 24, NOTE #2
 KEYSENSE  N/A  
 PARKING LIGHTS ( - )  N/A  
 PARKING LIGHTS ( + )  RED (+)  @ FUSE BOX, (WHITE, 10-PIN PLUG), PIN 8
 POWER LOCK  PURPLE (TYPE B), See NOTE #3  @ POWER WINDOW Main Switch,(WHITE, 16-PIN PLUG), PIN 4
 POWER UNLOCK  YELLOW (TYPE B), Requires Double Pulse, See NOTE #4  @ POWER WINDOW Main Switch,(WHITE, 16-PIN PLUG), PIN 6
 DOOR TRIGGER  GRAY (-)  @ BCM, (GREEN, 40-PIN PLUG), PIN 39, NOTE #2
 DOMELIGHT SUPERVISION  LT. BLUE (-)  @ BCM, (WHITE, 16-PIN PLUG), PIN 16, NOTE #2
 TRUNK RELEASE  PINK (-), NOTE #5  @ BCM, (GRAY, 40-PIN PLUG), PIN 36, NOTE #2
 SLIDING POWER DOOR  N/A  
 HORN  GREEN (-)  @ HORN Switch, (GRAY, 8-PIN PLUG), PIN 8
 TACH  RED (AC)  @ ECM, (GRAY, 32-PIN PLUG), PIN 14(V6) or PIN 1(V8), NOTE #6
 WAIT TO START LIGHT  N/A  
 BRAKE  PINK (+)  @ BCM, (GREEN, 40-PIN PLUG), PIN 7, NOTE #2
 FACTORY ALARM DISARM   Use UNLOCK wire  
 ANTI-THEFT  INFINITI'S TRANSPONDER ANTI-THEFT SYSTEM, Requires Bypass Module, See NOTE #1  
 EXTRA INFORMATION
 NOTE #1: NISSAN'S TRANSPONDER ANTI-THEFT SYSTEM, Requires Bypass Module, Part # 791 or XK09 (For REMOTE START ONLY) Part # DB-ALL (for REMOTE START and DOOR LOCKS) to order the INTERFACE BYPASS MODULES go to the Interface Bypass Module page on this website. NOTE #2: the BCM (Body Control Module) is located in the PASSENGER KICK PANEL. NOTE #3: TEST this wire while Turning the KEY in the Drivers Door. This wire will also ARM the FACTORY ALARM. NOTE #4: TEST this wire while Turning the KEY in the Drivers Door. This wire will also DISARM the FACTORY ALARM. NOTE #5: TEST this wire while opening the Liftgate with the Handle on the REAR of the Vehicle. NOTE #6: the ECM, (Engine control Module) is located Behind the GLOVE BOX.