Vehicle
Wiring Details for your
2012- Kia Rio Wiring Diagram |
Printer Friendly Version |
|
|
Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 2012- Kia Rio . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
|
|
|
|
PART |
COLOR |
LOCATION |
12 VOLT
CONSTANT |
PINK (+) See NOTE #2 |
BLACK 6-PIN PLUG, PIN 1 @ IGNITION SWITCH |
STARTER |
WHITE (+) See NOTE #3 |
LACK 6-PIN PLUG, PIN 3 @ IGNITION SWITCH |
STARTER
2 |
PINK(-) and GRAY/BLACK(-) (PUSH-BUTTON START VEHICLES ONLY) |
@ START/STOP BUTTON SWITCH, WHITE 12-PIN PLUG, PINS 1 and 8 |
IGNITION
1 |
PINK (+) See NOTE #4 |
BLACK 6-PIN PLUG, PIN 4 @ IGNITION SWITCH |
IGNITION
2 |
N/A |
|
IGNITION
3 |
N/A |
|
ACCESSORY/HEATER
BLOWER 1 |
RED (+) See NOTE #5 |
BLACK 6-PIN PLUG, PIN 2 @ IGNITION SWITCH |
ACCESSORY/HEATER
BLOWER 2 |
GREEN (+) See NOTE #6 |
BLACK 6-PIN PLUG, PIN 6 @ IGNITION SWITCH |
KEYSENSE |
N/A |
|
PARKING
LIGHTS ( - ) |
PINK/BLACK (-) |
WHITE 26-PIN PLUG, PIN 7 @ BCM, See NOTE #7 |
PARKING
LIGHTS ( + ) |
N/A |
|
POWER LOCK |
PINK (TYPE B)(-) Negative |
WHITE 16-PIN PLUG, PIN 6 @ BCM, See NOTE #7 |
POWER UNLOCK |
RED (TYPE B)(-) Negative |
WHITE 16-PIN PLUG, PIN 5 @ BCM, See NOTE #7 |
DOOR TRIGGER |
GREEN (-) |
WHITE 26-PIN PLUG, PIN 23 @ BCM, See NOTE #7 |
DOMELIGHT
SUPERVISION |
BLUE (-) |
WHITE 22-PIN PLUG, PIN 3 @ BCM, See NOTE #7 |
TRUNK RELEASE |
BLUE (-) |
WHITE 22-PIN PLUG, PIN 21 @ BCM, See NOTE #7 |
SLIDING
POWER DOOR |
N/A |
|
HORN |
BLUE (-) |
WHITE 41-PIN PLUG, PIN 26 @ RIGHT side of DASH FUSEBOX |
TACH |
PINK, GREEN, BROWN or RED (AC) |
TOP FRONT OF ENGINE, BLACK 12-PIN PLUG, PINS 1, 3, 5 or 7 |
WAIT TO
START LIGHT |
N/A |
|
BRAKE |
GREEN (+) |
BLUE 20-PIN PLUG, PIN 16 @ LEFT of DASH FUSEBOX |
FACTORY
ALARM DISARM |
N/A |
|
ANTI-THEFT |
See NOTE #1 |
|
EXTRA
INFORMATION |
NOTE #1: This vehicle May Be Equipped with KIA'S TRANSPONDER ANTI-THEFT SYSTEM,
check the OWNERS MANUAL for this vehcile or contact your HYUNDAI Dealer to see if
the vehicle has a Special programmed Ignition Key, if it does, then for REMOTE
STARTING you will need the 791 BYPASS Module and an Extra Ignition key.
To Order the 791 go to the SECURITY BYPASS MODULE Page on this website.
NOTE #2: On vehicles with the SMART KEY , use a RED(+) or WHITE(+) in a BLACK 2-PIN
PLUG(D) PINS 1 and 2 @ the DASH FUSEBOX
NOTE #3: On vehicles with the SMART KEY , use a WHITE(+) at the REAR WHITE 21-PIN
PLUG(A) PIN 3 @ the DASH FUSEBOX
NOTE #4: On vehicles with the SMART KEY , use a GREEN(+) at the REAR WHITE 54-PIN
PLUG(B) PIN 25 @ the DASH FUSEBOX
NOTE #5: On vehicles with the SMART KEY , use a RED(+) at the REAR WHITE 54-PIN
PLUG(B) PIN 1 @ the DASH FUSEBOX
NOTE #6: On vehicles with the SMART KEY , use a PINK(+) at the REAR WHITE 54-PIN
PLUG(B) PIN 31 @ the DASH FUSEBOX
NOTE #7: The BCM is located to the RIGHT of the STEERING COLUMN
|
|
|
|
|