Vehicle
Wiring Details for your
2011-2012 Toyota Sienna Wiring Diagram |
Printer Friendly
Version |
|
|
Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 2011-2012 Toyota Sienna . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
|
|
|
 |
| PART |
COLOR |
LOCATION |
| 12 VOLT
CONSTANT |
WHITE (+) |
@ WHITE 1-PIN PLUG(2K), PIN 1, @ DASH FUSEBOX |
| STARTER |
RED (+) |
@ IGNITION SWITCH, WHITE 8-PIN PLUG, PIN 8 |
| STARTER
2 |
N/A |
|
| IGNITION
1 |
BLACK (+) |
@ IGNITION SWITCH, WHITE 8-PIN PLUG, PIN 6 |
| IGNITION
2 |
YELLOW (+) |
@ IGNITION SWITCH, WHITE 8-PIN PLUG, PIN 4 |
| IGNITION
3 |
N/A |
|
| ACCESSORY/HEATER
BLOWER 1 |
BLUE (+) |
@ IGNITION SWITCH, WHITE 8-PIN PLUG, PIN 3 |
| ACCESSORY/HEATER
BLOWER 2 |
N/A |
|
| KEYSENSE |
RED (-) |
@ WHITE 30-PIN PLUG, PIN 17, @ BODY ECU, See NOTE #2 |
| PARKING
LIGHTS ( - ) |
YELLOW (-) |
@ WHITE 30-PIN PLUG, PIN 30, @ BODY ECU, See NOTE #2 |
| PARKING
LIGHTS ( + ) |
BROWN (+) |
@ WHITE 36-PIN PLUG(2H), PIN 30, @ DASH FUSEBOX |
| POWER LOCK |
BLACK (TYPE B) |
@ WHITE 30-PIN PLUG, PIN 9, @ BODY ECU, See NOTE #2 |
| POWER UNLOCK |
GREEN (TYPE B) |
@ WHITE 30-PIN PLUG, PIN 10, @ BODY ECU, See NOTE #2 |
| DOOR TRIGGER |
PINK (-) |
@ WHITE 36-PIN PLUG(2H), PIN 35, @ DASH FUSEBOX |
| DOMELIGHT
SUPERVISION |
BLUE (-) |
@ REAR WHITE 40-PIN PLUG(2D), PIN 27, @ DASH FUSEBOX |
| TRUNK RELEASE |
BLUE (-) |
@ WHITE 30-PIN PLUG, PIN 23, @ BODY ECU, See NOTE #2 |
| SLIDING
POWER DOOR |
YELLOW (-) |
@ WHITE 28-PIN PLUG, PIN 5, @ BODY ECU, See NOTE #2 |
| HORN |
GREEN/BLACK or GREEN/WHITE (-) |
@ WHITE 40-PIN PLUG(2F), PIN 24, @ DASH FUSEBOX |
| TACH |
YELLOW (AC) |
@ DATA LINK CONNECTOR, WHITE 16-PIN PLUG, PIN 9 |
| WAIT TO
START LIGHT |
N/A |
|
| BRAKE |
BLUE (+) |
@ BRAKE PEDAL SWITCH |
| FACTORY
ALARM DISARM |
BLUE (-) (Drivers Door Key Cylinder) Double Pulse |
@ WHITE 30-PIN PLUG, PIN 24, @ BODY ECU, See NOTE #2 |
| ANTI-THEFT |
TOYOTA'S TRANSPONDER ANTI-THEFT SYSTEM, See NOTE #1 |
@ IGNITION SWITCH TUMBLER |
| EXTRA
INFORMATION |
| NOTE #1: TOYOTA'S TRANSPONDER SYSTEM, Requires Bypass Module:
(For Remote Starting Only) Part #791 Bypass, (Requires Extra Key) for Operation.
(For Remote Starting/Door Locks) Part # DB-ALL (No Extra Key Required for Operation)
1-KEY Required for Programming.
To order please go to the SECURITY BYPASS MODULE Page or INTERFACE BYPASS
MODULE Page on this website.
NOTE #2; The BODY ECU is under the DRIVERS DASH and attached to the RIGHT SIDE of the
DASH FUSEBOX.
|
|
|
|
|
|
