Vehicle
Wiring Details for your
2011- Infiniti M56 Wiring Diagram |
Printer Friendly Version |
|
|
Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 2011- Infiniti M56 . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
|
|
|
|
PART |
COLOR |
LOCATION |
12 VOLT
CONSTANT |
WHITE (+) |
WHITE 15-PIN PLUG, PIN 15 @ BCM, See NOTE #2 |
STARTER |
BROWN (-) (Push-Button Start) |
@ PUSH-BUTTON START Ignition Switch or WHITE 40-PIN PLUG, PIN 30, See NOTE #2 |
STARTER
2 |
LT. BLUE (-) |
@ WHITE 40-PIN PLUG, PIN 27, See NOTE #2 |
IGNITION
1 |
RED (+) |
@ WHITE 40-PIN PLUG, PIN 29, See NOTE #2 |
IGNITION
2 |
BLACK (-) |
@ WHITE 40-PIN PLUG, PIN 28, See NOTE #2 |
IGNITION
3 |
N/A |
|
ACCESSORY/HEATER
BLOWER 1 |
BLACK (+) |
@ WHITE 40-PIN PLUG, PIN 36, See NOTE #2 |
ACCESSORY/HEATER
BLOWER 2 |
LT. BLUE (+) |
@ WHITE 40-PIN PLUG, PIN 26, See NOTE #2 |
KEYSENSE |
N/A |
|
PARKING
LIGHTS ( - ) |
N/A |
|
PARKING
LIGHTS ( + ) |
BLUE (+) |
in DRIVERS KICK, HARNESS to REAR of Vehicle |
POWER LOCK |
BROWN (TYPE B) See NOTE #3 |
WHITE 15-PIN PLUG, PIN 15 @ POWER WINDOW MAIN SWITCH |
POWER UNLOCK |
GRAY (TYPE B) Requires Double Pulse, See NOTE #4 |
WHITE 15-PIN PLUG, PIN 16 @ POWER WINDOW MAIN SWITCH |
DOOR TRIGGER |
LT. GREEN (-) |
BLACK 15-PIN PLUG, PIN 7 @ BCM, See NOTE #2 |
DOMELIGHT
SUPERVISION |
BLUE (-) |
WHITE 15-PIN PLUG, PIN 8 @ BCM, See NOTE #2 |
TRUNK RELEASE |
TAN (-) |
@ TRUNK RELEASE SWITCH or BLACK 40-PIN PLUG, PIN 30, See NOTE #2 |
SLIDING
POWER DOOR |
N/A |
|
HORN |
LT. GREEN (-) |
GRAY 8-PIN PLUG, PIN 8 @ HORN SWITCH |
TACH |
PURPLE (AC) |
WHITE 12-PIN PLUG, PIN 10 @ POWER STEERING CONTROL UNIT, See NOTE #5 |
WAIT TO
START LIGHT |
N/A |
|
BRAKE |
PURPLE ot PINK (+) |
@ BRAKE PEDAL SWITCH or BCM, BLACK 40-PIN PLUG, PIN 9, See NOTE #2 |
FACTORY
ALARM DISARM |
See UNLOCK! |
|
ANTI-THEFT |
INFINITI'S TRANSPONDER ANTI-THEFT SYSTEM, Requires Bypass Module, See NOTE #1 |
|
EXTRA
INFORMATION |
NOTE #1: This vehicle is equipped with INFINITI'S TRANSPONDER ANTI-THEFT SYSTEM, and
Requires Bypass Module, Part 791 Bypass Module for Remote Starting, this bypass
will also require and extra ignition key that starts this vehicle to be placed inside the
791 for Operation.
To order please go to the SECURITY BYPASS MODULE Page on this website.
NOTE #2: The BCM is located under the Drivers Side of the Dash and to the Left of the Steering
Column.
NOTE #3: The LOCK wire is also the ARM wire, TEST this wire while turning the key in the Drivers
Door Key cylinder.
NOTE #4: The UNLOCK wire is also the DISARM wire, TEST this wire while turning the key in the
Drivers Door key cylinder.
NOTE #5; The POWER STEERING CONTROL UNIT is located behind the GLOVE BOX.
|
|
|
|
|