Vehicle
Wiring Details for your
2010-2011 Hyundai Tucson Wiring Diagram |
Printer Friendly
Version |
|
|
Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 2010-2011 Hyundai Tucson . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
|
|
|
 |
| PART |
COLOR |
LOCATION |
| 12 VOLT
CONSTANT |
RED (+), NOTE #2 |
@ IGNITION SWITCH, (WHITE, 6-PIN PLUG), PIN 1 |
| STARTER |
GREEN (+), NOTE #3 |
@ IGNITION SWITCH, (WHITE, 6-PIN PLUG), PIN 3 |
| STARTER
2 |
WHITE (+) and BLUE (+), (PUSH-START BUTTON) |
|
| IGNITION
1 |
PINK (+), NOTE #4 |
@ IGNITION SWITCH, (WHITE, 6-PIN PLUG), PIN 4 |
| IGNITION
2 |
N/A |
|
| IGNITION
3 |
N/A |
|
| ACCESSORY/HEATER
BLOWER 1 |
BLUE (+), NOTE #5 |
@ IGNITION SWITCH, (WHITE, 6-PIN PLUG), PIN 2 |
| ACCESSORY/HEATER
BLOWER 2 |
WHITE (+), NOTE #6 |
@ IGNITION SWITCH, (WHITE, 6-PIN PLUG), PIN 6 |
| KEYSENSE |
N/A |
|
| PARKING
LIGHTS ( - ) |
YELLOW (-) |
@ HEADLIGHT SWITCH, (WHITE, 13-PIN PLUG), PIN 1 |
| PARKING
LIGHTS ( + ) |
GREEN(+)(Left) and YELLOW(+)(Right) use both! |
@ DASH FUSE BOX, (WHITE, 40-PIN PLUG(D), PINS 2 and 1 |
| POWER LOCK |
BLUE/BLACK (TYPE B) |
@ DASH FUSE BOX, (WHITE, 40-PIN PLUG(D), PIN 37 |
| POWER UNLOCK |
GRAY/BLACK (TYPE B), NOTE #7 |
@ DASH FUSE BOX, (WHITE, 40-PIN PLUG(D), PIN 36 |
| DOOR TRIGGER |
GREEN/ORANGE (-) |
@ DASH FUSE BOX, (WHITE, 40-PIN PLUG(D), PIN 24 |
| DOMELIGHT
SUPERVISION |
BROWN (-) |
@ DRIVERS FRONT A Pillar, (WHITE, 22-PIN PLUG), PIN 1 |
| TRUNK RELEASE |
YELLOW/BLACK (-), NOTE #8 |
@ DASH FUSE BOX, (WHITE, 40-PIN PLUG(D), PIN 35 |
| SLIDING
POWER DOOR |
N/A |
|
| HORN |
GRAY (-) |
in DRIVERS KICK PANEL, (WHITE, 24-PIN PLUG), PIN 20 |
| TACH |
GREEN, BLUE, GRAY or BROWN (AC) |
@ Any FUEL-INJECTOR |
| WAIT TO
START LIGHT |
N/A |
|
| BRAKE |
GREEN (+) |
@ BRAKE PEDAL SWITCH or in DRIVERS KICK PANEL, (WHITE, 24-PIN PLUG), PIN 6 |
| FACTORY
ALARM DISARM |
PINK (-) and GRAY (-), use both, Requires Double Pulse, NOTE #9 |
@ DASH FUSE BOX, (WHITE, 40-PIN PLUG(D), PINS 28 and 31 |
| ANTI-THEFT |
HYUNDAI'S TRANSPONDER ANTI-THEFT SYSTEM, See NOTE #1 |
@ IGNITION SWITCH TUMBLER |
| EXTRA
INFORMATION |
| NOTE #1: This vehicle May Be Equipped with HYUNDAI'S TRANSPONDER ANTI-THEFT SYSTEM,
check the OWNERS MANUAL for this vehcile or contact your HYUNDAI Dealer to see if
the vehicle has a Special programmed Ignition Key, if it does, then for REMOTE
STARTING you will need the 791 BYPASS Module and an Extra Ignition key.
To Order the 791 go to the SECURITY BYPASS MODULE Page on this website.
NOTE #2: on Vehicles with SMART KEY, this wire is in the DRIVERS KICK PANEL, (BLUE, 15-PIN
PLUG), PIN 12
NOTE #3: on Vehicles with SMART KEY, this wire is RED (+) at the DASH FUSE BOX, (REAR WHITE,
16-PIN PLUG(J), PIN 12
NOTE #4: on Vehicles with SMART KEY, this wire is at the DASH FUSE BOX, (REAR WHITE,
18-PIN PLUG(H), PIN 14
NOTE #5: on Vehicles with SMART KEY, this wire is at the DASH FUSE BOX, (REAR WHITE,
16-PIN PLUG(J), PIN 13
NOTE #6: on Vehicles with SMART KEY, this wire is at the DASH FUSE BOX, (REAR WHITE,
16-PIN PLUG(J), PIN 11
NOTE #7: to UNLOCK just the DRIVERS DOOR use the YELLOW/BLACK (-) at the DASH FUSE
BOX, (REAR, WHITE, 28-PIN PLUG(F), PIN 8.
NOTE #8: TEST this wire while Opening the Liftgate from the Handle on the REAR of the Vehicle
NOTE #9: TEST this wire while Turning the KEY in the DRIVERS DOOR.
|
|
|
|
|
|
