Vehicle
Wiring Details for your
2009-2012 Toyota Tacoma Wiring Diagram |
Printer Friendly
Version |
|
|
Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 2009-2012 Toyota Tacoma . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
|
|
|
 |
| PART |
COLOR |
LOCATION |
| 12 VOLT
CONSTANT |
WHITE/RED (+) |
@ IGNITION SWITCH, (WHITE, 8-Pin Plug) Pin 5 |
| STARTER |
GREEN/BLACK (+) |
@ IGNITION SWITCH, (WHITE, 8-Pin Plug) Pin 7 |
| STARTER
2 |
BLACK/WHITE (+) |
@ IGNITION SWITCH, (WHITE, 8-Pin Plug) Pin 3 |
| IGNITION
1 |
BLACK/RED (+) |
@ IGNITION SWITCH, (WHITE, 8-Pin Plug) Pin 6 |
| IGNITION
2 |
BLUE/YELLOW (+) |
@ IGNITION SWITCH, (WHITE, 8-Pin Plug) Pin 1 |
| IGNITION
3 |
N/A |
|
| ACCESSORY/HEATER
BLOWER 1 |
WHITE/GREEN (+) |
@ IGNITION SWITCH, (WHITE, 8-Pin Plug) Pin 2 |
| ACCESSORY/HEATER
BLOWER 2 |
N/A |
|
| KEYSENSE |
N/A |
|
| PARKING
LIGHTS ( - ) |
GREEN (-) |
@ HEADLIGHT SWITCH, (WHITE, 20-Pin Plug) Pin 18 |
| PARKING
LIGHTS ( + ) |
GREEN (+) |
@ DASH FUSE BOX, (WHITE, 13-Pin Plug(D) Pin 10 |
| POWER LOCK |
BLUE/WHITE (TYPE B) |
in DRIVERS KICK PANEL, (WHITE, 10-Pin Plug) Pin 6 |
| POWER UNLOCK |
GRAY (TYPE B) |
in DRIVERS KICK PANEL, (WHITE, 10-Pin Plug) Pin 7 |
| DOOR TRIGGER |
GREEN/YELLOW (-) |
@ DASH FUSE BOX, (WHITE, 18-Pin Plug(F) Pin 7 |
| DOMELIGHT
SUPERVISION |
BLUE (-) |
@ DASH FUSE BOX, (BLACK, 13-Pin Plug(E) Pin 9 |
| TRUNK RELEASE |
N/A |
|
| SLIDING
POWER DOOR |
N/A |
|
| HORN |
GREEN/RED (-) |
@ DASH FUSE BOX, (WHITE, 18-Pin Plug(C) Pin 10 |
| TACH |
BLACK/WHITE (AC) |
@ DATA LINK Connector, (WHITE, 16-Pin Plug) Pin 9 |
| WAIT TO
START LIGHT |
N/A |
|
| BRAKE |
BLUE (+) |
@ DASH FUSE BOX, (WHITE, 13-Pin Plug(D) Pin 13 |
| FACTORY
ALARM DISARM |
GREEN/BLACK (-) (Requires Double Pulse), NOTE #2 |
in DRIVERS KICK PANEL, (WHITE, 10-Pin Plug) Pin 8 |
| ANTI-THEFT |
TOYOTA'S TRANSPONDER SYSTEM, See NOTE #1 |
@ IGNITION SWITCH TUMBLER |
| EXTRA
INFORMATION |
| NOTE #1: TOYOTA'S TRANSPONDER SYSTEM, Requires Bypass Module:
(for Remote Start Only) USE, A 791 bypass and a spare key or an INTERFACE
MODULE (no spare key needed) Part # PK-ALL, to order go to the INTERFACE BYPASS
MODULE Page on this website.
NOTE #2: TEST this wire while turning the Key in the Drivers Door, this wire will also Unlock
the Doors.
|
|
|
|
|
|
