Vehicle
Wiring Details for your
2009-2012 Toyota Tundra Wiring Diagram |
Printer Friendly
Version |
|
|
Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 2009-2012 Toyota Tundra . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
|
|
|
 |
| PART |
COLOR |
LOCATION |
| 12 VOLT
CONSTANT |
BLACK (+) |
@ DASH FUSE BOX, (WHITE 1-Pin Plug) Pin 1 |
| STARTER |
GREEN (+) |
@ IGNITION SWITCH, (WHITE, 8-Pin Plug) Pin 7 |
| STARTER
2 |
N/A |
|
| IGNITION
1 |
BLACK (+) |
@ IGNITION SWITCH, (WHITE, 8-Pin Plug) Pin 6 |
| IGNITION
2 |
LT. GREEN (+) |
@ IGNITION SWITCH, (WHITE, 8-Pin Plug) Pin 1 |
| IGNITION
3 |
N/A |
|
| ACCESSORY/HEATER
BLOWER 1 |
GRAY (+) |
@ IGNITION SWITCH, (WHITE, 8-Pin Plug) Pin 2 |
| ACCESSORY/HEATER
BLOWER 2 |
N/A |
|
| KEYSENSE |
N/A |
|
| PARKING
LIGHTS ( - ) |
TAN (-) |
@ HEADLIGHT SWITCH, or BODY ECU, (WHITE, 26-Pin Plug) Pin 23, NOTE #3 |
| PARKING
LIGHTS ( + ) |
GREEN (+) |
@ DASH FUSE BOX, (WHITE, 24-Pin Plug(B) Pin 8 |
| POWER LOCK |
WHITE (TYPE B) See Note #4 |
in DRIVERS KICK PANEL, (BLUE, 17-Pin Plug) Pin 7 |
| POWER UNLOCK |
RED (TYPE B) See Note #4 |
in DRIVERS KICK PANEL, (BLUE, 17-Pin Plug) Pin 6 |
| DOOR TRIGGER |
BROWN (-) |
@ BODY ECU, (WHITE, 26-Pin Plug) Pin 24, NOTE #3 |
| DOMELIGHT
SUPERVISION |
BLUE (-), (REQUIRES #775 RELAY) |
@ INTERIOR LIGHT SWITCH on DASH,(BLACK, 10-Pin Plug) Pin 10 |
| TRUNK RELEASE |
N/A |
|
| SLIDING
POWER DOOR |
N/A |
|
| HORN |
TAN to PURPLE (-) |
@ HORN SWITCH or DASH FUSE BOX, (WHITE, 24-Pin Plug(B) Pin 1 |
| TACH |
WHITE (AC) |
@ DATA LINK Connector, (WHITE, 16-Pin Plug) Pin 9 |
| WAIT TO
START LIGHT |
N/A |
|
| BRAKE |
TAN (+) |
@ BRAKE SWITCH, (BLUE, 4-Pin Plug) Pin 1 |
| FACTORY
ALARM DISARM |
PINK to BLACK (-), (Requires Double Pulse), NOTE #2 |
in DRIVERS KICK PANEL, (BLUE, 17-Pin Plug) Pin 16 |
| ANTI-THEFT |
TOYOTA'S TRANSPONDER SYSTEM, See NOTE #1 |
@ IGNITION SWITCH TUMBLER |
| EXTRA
INFORMATION |
| NOTE #1: TOYOTA'S TRANSPONDER SYSTEM, Requires Bypass Module:
(For Remote Starting Only) Part #791 Bypass, (Requires Extra Key) for Operation.
(For Remote Starting Only) Part # PK-ALL Bypass. (No Extra Key Required for
Operation) 2-KEYS Required to Program Module.
(For Remote Starting/Door Locks) Part # DB-ALL (No Extra Key Required for Operation)
1-KEY Required for Programming.
To order please go to the SECURITY BYPASS MODULE Page or INTERFACE BYPASS
MODULE Page on this website.
IF YOUR TRUCK HAS A G-KEY, YOU MUST USE A 791 BYPASS AND SPARE KEY!!!!!!
NOTE #2: TEST this wire while turning the Key in the Drivers Door, this wire will also Unlock
the Doors.
NOTE #3: The BODY ECU (Electronic Control Unit) is located under the Drivers Dash, attached to
the Dash Fuse Box.
NOTE #4: In some cases you must use the Arm/Lock and Disarm/Unlock instead of the Power Lock/Unlock
Arm/Lock is Light Green in Driver Kick Panel Blue 17-pin plug, Pin 14
Disarm/Unlock is Pink in Driver Kick Panel Blue 17-pin plug, Pin 16
Program Module For Double Pulse Unlock
|
|
|
|
|
|
