Vehicle
Wiring Details for your
2009-2011 Toyota Venza Wiring Diagram |
Printer Friendly Version |
|
|
Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 2009-2011 Toyota Venza . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
|
|
|
|
PART |
COLOR |
LOCATION |
12 VOLT
CONSTANT |
BLACK (+) |
@ DASH FUSE BOX, (WHITE, 1-Pin Plug(A) Pin 1 |
STARTER |
RED (+) |
@ IGNITION SWITCH, (WHITE, 8-Pin Plug) Pin 8 |
STARTER
2 |
GREEN (+) |
@ IGNITION SWITCH, (WHITE, 8-Pin Plug) Pin 1 |
IGNITION
1 |
GREEN (+) |
@ IGNITION SWITCH, (WHITE, 8-Pin Plug) Pin 6 |
IGNITION
2 |
RED (+) |
@ IGNITION SWITCH, (WHITE, 8-Pin Plug) Pin 4 |
IGNITION
3 |
N/A |
|
ACCESSORY/HEATER
BLOWER 1 |
GREEN (+) |
@ IGNITION SWITCH, (WHITE, 8-Pin Plug) Pin 3 |
ACCESSORY/HEATER
BLOWER 2 |
N/A |
|
KEYSENSE |
N/A |
|
PARKING
LIGHTS ( - ) |
RED (-) |
@ HEADLIGHT SWITCH, (WHITE, 20-Pin Plug) Pin 18 |
PARKING
LIGHTS ( + ) |
N/A |
|
POWER LOCK |
GREEN (TYPE B), (TEST with Passenger Switch) |
@ DASH FUSE BOX, (WHITE, 12-Pin Plug(J) Pin 3 |
POWER UNLOCK |
BLUE (TYPE B), (TEST with Passenger Switch) |
@ DASH FUSE BOX, (WHITE, 12-Pin Plug(J) Pin 4 |
DOOR TRIGGER |
GRAY (-) |
in DRIVERS KICK PANEL, (WHITE, 25-Pin Plug) Pin 6 |
DOMELIGHT
SUPERVISION |
PINK (-), (Requires #775 Relay) |
@ DASH FUSE BOX, (WHITE, 12-Pin Plug(R) Pin 5 |
TRUNK RELEASE |
PURPLE (-), NOTE #2, (Requires #775 Relay) |
in DRIVERS KICK PANEL, (WHITE, 25-Pin Plug) Pin 5 |
SLIDING
POWER DOOR |
N/A |
|
HORN |
YELLOW to RED (-) |
@ HORN SWITCH or DASH FUSE BOX, (WHITE, 30-Pin Plug(C) Pin 25 |
TACH |
GRAY (AC) |
@ DATA LINK Connector, (BLACK, 16-Pin Plug) Pin 9 |
WAIT TO
START LIGHT |
N/A |
|
BRAKE |
LT.GREEN to BLUE (+) |
@ BRAKE PEDAL SWITCH |
FACTORY
ALARM DISARM |
GRAY (-) (Requires Double Pulse), NOTE #3 |
in DRIVERS KICK PANEL, (WHITE, 18-Pin Plug) Pin 8 |
ANTI-THEFT |
TOYOTA'S TRANSPONDER SYSTEM, See NOTE #1 |
@ IGNITION SWITCH TUMBLER |
EXTRA
INFORMATION |
NOTE #1: TOYOTA'S TRANSPONDER SYSTEM, Requires Bypass Module:
(For Remote Starting Only) Part #791 Bypass, (Requires Extra Key) for Operation.
(For Remote Starting Only) Part # PK-ALL Bypass. (No Extra Key Required for
Operation) 2-KEYS Required to Program Module.
(For Remote Starting/Door Locks) Part # DB-ALL (No Extra Key Required for Operation)
1-KEY Required for Programming.
To order please go to the SECURITY BYPASS MODULE Page or INTERFACE BYPASS
MODULE Page on this website.
NOTE #2: TEST this wire while opening the Liftgate with th Handle on the rear of the vehicle.
On vehicles with Power Liftgate, this wire is a BROWN (-) @ the Power Liftgate Switch
on the Driver Dash, (BLACK, 5-Pin Plug) Pin 4.
NOTE #3: TEST this wire while turning the Key in the Drivers Door, this wire will also Unlock the
doors.
|
|
|
|
|