Vehicle
Wiring Details for your
2009-2011 Nissan Cube Wiring Diagram |
Printer Friendly
Version |
|
|
Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 2009-2011 Nissan Cube . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
|
|
|
 |
| PART |
COLOR |
LOCATION |
| 12 VOLT
CONSTANT |
BLUE (+) |
@ IGNITION SWITCH, (WHITE, 6-PIN PLUG), PIN 1 |
| STARTER |
WHITE (+), NOTE #3 |
@ IGNITION SWITCH, (WHITE, 6-PIN PLUG), PIN 5 |
| STARTER
2 |
BLUE/RED (-) with INTELLIGENT KEY ONLY!! |
@ BCM, (WHITE, 40-PIN PLUG), PIN 27, NOTE #2 |
| IGNITION
1 |
WHITE/RED (+), NOTE #4 |
@ IGNITION SWITCH, (WHITE, 6-PIN PLUG), PIN 3 |
| IGNITION
2 |
BROWN (-) with INTELLIGENT KEY ONLY!! |
@ BCM, (WHITE, 40-PIN PLUG), PIN 28, NOTE #2 |
| IGNITION
3 |
N/A |
|
| ACCESSORY/HEATER
BLOWER 1 |
YELLOW/BLACK (+), NOTE #5 |
@ IGNITION SWITCH, (WHITE, 6-PIN PLUG), PIN 4 |
| ACCESSORY/HEATER
BLOWER 2 |
GREEN (+), NOTE #6 |
@ IGNITION SWITCH, (WHITE, 6-PIN PLUG), PIN 2 |
| KEYSENSE |
N/A |
|
| PARKING
LIGHTS ( - ) |
N/A |
|
| PARKING
LIGHTS ( + ) |
BROWN/WHITE (+) |
in DRIVERS KICK PANEL, (WHITE, 16-PIN PLUG), PIN 13 |
| POWER LOCK |
GRAY (TYPE B) |
@ BCM, (WHITE, 15-PIN PLUG), PIN 5, NOTE #2 |
| POWER UNLOCK |
BROWN (TYPE B) |
@ BCM, (WHITE, 15-PIN PLUG), PIN 6, NOTE #2 |
| DOOR TRIGGER |
BROWN/YELLOW (-) |
@ BCM, (WHITE, 15-PIN PLUG), PIN 7, NOTE #2 |
| DOMELIGHT
SUPERVISION |
BROWN (-) |
@ BCM, (BLACK, 15-PIN PLUG), PIN 8, NOTE #2 |
| TRUNK RELEASE |
RED/WHITE (-) UNLOCK, (with INTELLIGENT KEY ONLY!) |
@ BCM, (WHITE, 40-PIN PLUG), PIN 2, NOTE #2 |
| SLIDING
POWER DOOR |
N/A |
|
| HORN |
RED/BLACK (-) |
in DRIVERS KICK PANEL, (WHITE, 100-PIN PLUG), PIN 94 |
| TACH |
BLUE, ORANGE, YELLOW or PURPLE (AC) |
@ Any FUEL-INJECTOR |
| WAIT TO
START LIGHT |
N/A |
|
| BRAKE |
RED (+) NOTE #8 |
@ BCM, (WHITE, 40-PIN PLUG), PIN 9, (without INTELLIGENT KEY) NOTE #2 |
| FACTORY
ALARM DISARM |
WHITE/RED (-) Requires Double Pulse, NOTE #7 and #9 |
@ BCM, (WHITE, 40-PIN PLUG), PIN 7, (without INTELLIGENT KEY) NOTE #2 |
| ANTI-THEFT |
NISSAN'S TRANSPONDER ANTI-THEFT SYSTEM, See NOTE #1 |
|
| EXTRA
INFORMATION |
| NOTE #1: This vehicle is Equipped with NISSAN'S TRANSPONDER ANTI-THEFT SYSTEM,
for REMOTE STARTING ONLY you will need the Part #791 BYPASS Module and an
Extra Ignition key. (Requires extra key for Operation)
Part # XK09 for REMOTE STARTING ONLY, requires 1 key for
programming, NO key required for Operation.
Part # DB-ALL for REMOTE START/KEYLESS Entry, requires 1 key for programming
and NO Key for Operation.
To Order the go to the SECURITY BYPASS MODULE Page or INTERFACE BYPASS
MODULE Page on this website.
NOTE #2: the BCM, (Body Control Module) is located under the Drivers Dash, behind the
DASH FUSE BOX.
NOTE #3: On vehicles with INTELLIGENT KEY this wire is a BLUE/ORANGE (-) @ the PUSH-BUTTON
Ignition Switch, (BROWN, 8-PIN PLUG), PIN 8 or BCM, (WHITE, 40-PIN PLUG) PIN 30
NOTE #4: On vehicles with INTELLIGENT KEY this wire is a WHITE/RED (-) at the BCM,
(WHITE, 40-PIN PLUG) PIN 29
NOTE #5: On vehicles with INTELLIGENT KEY this wire is a YELLOW/BLACK (+) at the BCM,
(WHITE, 40-PIN PLUG) PIN 36
NOTE #6: On vehicles with INTELLIGENT KEY this wire is a BROWN/WHITE or GREEN (+) at the
BCM, (WHITE, 40-PIN PLUG) PIN 26
NOTE #7: TEST this wire while Turning the KEY in the DRIVERS DOOR. This wire will also DISARM
the Factory Alarm System.
NOTE #8: on Vehicles with INTELLIGENT KEY, this wire is @ the BCM, (BLACK, 40-PIN PLUG),
PIN 9
NOTE #9: on Vehicles with INTELLIGENT KEY, this wire is @ the BCM, (BLACK, 40-PIN PLUG),
PIN 8
|
|
|
|
|
|
