Vehicle
Wiring Details for your
2009-2011 Nissan 370Z Wiring Diagram |
Printer Friendly Version |
|
|
Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 2009-2011 Nissan 370Z . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
|
|
|
|
PART |
COLOR |
LOCATION |
12 VOLT
CONSTANT |
WHITE (+) |
@ BCM, (BLACK, 3-PIN PLUG), PIN 1, NOTE #2 |
STARTER |
BROWN (-) |
@ PUSH-BUTTON IGNITION Switch or BCM, (BLACK, 40-PIN PLUG), PIN 18, NOTE #2 |
STARTER
2 |
LT. BLUE (-) |
@ BCM, (BLACK, 40-PIN PLUG), PIN 21, NOTE #2 |
IGNITION
1 |
RED (+) |
@ BCM, (BLACK, 40-PIN PLUG), PIN 11, NOTE #2 |
IGNITION
2 |
PURPLE or YELLOW (-) |
@ BCM, (BLACK, 40-PIN PLUG), PIN 16, NOTE #2 |
IGNITION
3 |
N/A |
|
ACCESSORY/HEATER
BLOWER 1 |
ORANGE (+) |
@ BCM, (BLACK, 40-PIN PLUG), PIN 31, NOTE #2 |
ACCESSORY/HEATER
BLOWER 2 |
ORANGE (+) |
@ BCM, (BLACK, 40-PIN PLUG), PIN 24, NOTE #2 |
KEYSENSE |
N/A |
|
PARKING
LIGHTS ( - ) |
N/A |
|
PARKING
LIGHTS ( + ) |
RED (+) |
in DRIVERS KICK PANEL, Harness to REAR of Vehicle |
POWER LOCK |
GRAY (TYPE B), NOTE #3 |
@ POWER WINDOW Main Switch, (WHITE, 16-PIN PLUG), PIN 6 |
POWER UNLOCK |
PURPLE or WHITE (TYPE B), (Requires Double Pulse) NOTE #4 |
@ POWER WINDOW Main Switch, (WHITE, 16-PIN PLUG), PIN 7 |
DOOR TRIGGER |
GRAY or RED (-) |
@ BCM, (GREEN, 40-PIN PLUG), PIN 39, NOTE #2 |
DOMELIGHT
SUPERVISION |
PINK or PURPLE (-) |
@ BCM, (WHITE, 16-PIN PLUG), PIN 16, NOTE #2 |
TRUNK RELEASE |
GRAY (-) NOTE #5 |
@ BCM, (GRAY, 40-PIN PLUG), PIN 36, NOTE #2 |
SLIDING
POWER DOOR |
N/A |
|
HORN |
LT. GREEN (-) |
@ HORN Switch, (GRAY, 8-PIN PLUG), PIN 8, under Steering Column cover |
TACH |
RED (AC) |
@ ECM, (GRAY, 32-PIN PLUG), PIN 14, NOTE #6 |
WAIT TO
START LIGHT |
N/A |
|
BRAKE |
PINK or BROWN (+) |
@ BCM, (GREEN, 40-PIN PLUG), PIN 7, NOTE #2 |
FACTORY
ALARM DISARM |
Use UNLOCK wire |
|
ANTI-THEFT |
NISSAN'S TRANSPONDER ANTI-THEFT SYSTEM, See NOTE #1 |
|
EXTRA
INFORMATION |
NOTE #1: This vehicle is Equipped with NISSAN'S TRANSPONDER ANTI-THEFT SYSTEM,
for REMOTE STARTING ONLY you will need the Part #791 BYPASS Module and an
Extra Ignition key. (Requires extra key for Operation)
Part # XK09 for REMOTE STARTING ONLY, requires 1 key for
programming, NO key required for Operation.
Part # DB-ALL for REMOTE START/KEYLESS Entry, requires 1 key for programming
and NO Key for Operation.
To Order the go to the SECURITY BYPASS MODULE Page or INTERFACE BYPASS
MODULE Page on this website.
To Order the go to the SECURITY BYPASS MODULE Page or INTERFACE BYPASS
MODULE Page on this website.
NOTE #2: the BCM, (Body Control Module) is located in the PASSENGER KICK PANEL.
NOTE #3: TEST this wire while turning the KEY in the DRIVERS DOOR. This wire also ARMS the
Factory Alarm System.
NOTE #4: TEST this wire while turning the KEY in the DRIVERS DOOR. This wire also DISARMS
the Factory Alarm System.
NOTE #5: TEST this wire while opening the Hatch from the Handle on the Rear of the vehicle.
NOTE #6: the ECM, (Engine Control Module) is located Behind the GLOVE BOX.
|
|
|
|
|