Vehicle
Wiring Details for your
2009-2011 Honda Fit Wiring Diagram |
Printer Friendly
Version |
|
|
Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 2009-2011 Honda Fit . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
|
|
|
 |
| PART |
COLOR |
LOCATION |
| 12 VOLT
CONSTANT |
WHITE (+) |
@ IGNITION SWITCH, (BROWN, 7-Pin Plug) Pin 3 |
| STARTER |
PINK (+) |
@ IGNITION SWITCH, (BROWN, 7-Pin Plug) Pin 1 |
| STARTER
2 |
N/A |
|
| IGNITION
1 |
YELLOW (+) |
@ IGNITION SWITCH, (BROWN, 7-Pin Plug) Pin 6 |
| IGNITION
2 |
N/A |
|
| IGNITION
3 |
N/A |
|
| ACCESSORY/HEATER
BLOWER 1 |
ORANGE (+) |
@ IGNITION SWITCH, (BROWN, 7-Pin Plug) Pin 4 |
| ACCESSORY/HEATER
BLOWER 2 |
RED (+) |
@ IGNITION SWITCH, (BROWN, 7-Pin Plug) Pin 5 |
| KEYSENSE |
N/A |
|
| PARKING
LIGHTS ( - ) |
GRAY (-) |
@ HEADLIGHT SWITCH, (BLACK/WHITE, 12-Pin Plug) Pin 11 |
| PARKING
LIGHTS ( + ) |
GRAY (+) |
@ DASH FUSE BOX, (GREEN/WHITE, 49-Pin Plug) Pin 42 |
| POWER LOCK |
LIGHT BLUE (TYPE B) |
@ DASH FUSE BOX, (LT.GREEN, 12-Pin Plug) Pin 8 |
| POWER UNLOCK |
GRAY (TYPE B) |
@ DASH FUSE BOX, (LT.GREEN, 12-Pin Plug) Pin 1 |
| DOOR TRIGGER |
BLUE (-) |
@ DASH FUSE BOX, (GREEN/WHITE, 49-Pin Plug) Pin 33 |
| DOMELIGHT
SUPERVISION |
BLUE (-) |
@ DASH FUSE BOX, (LT.GREEN, 8-Pin Plug) Pin 7 |
| TRUNK RELEASE |
(LOCKS/UNLOCKS with Doors) |
|
| SLIDING
POWER DOOR |
N/A |
|
| HORN |
ORANGE (-) |
@ HORN SWITCH, (WHITE, 20-Pin Plug) Pin 1 |
| TACH |
any BROWN, RED, BLUE or YELLOW (AC) |
@ FUEL-INJECTOR Harness, on Drivers side of Engine |
| WAIT TO
START LIGHT |
N/A |
|
| BRAKE |
LIGHT GREEN (+) |
@ BRAKE SWITCH or DASH FUSE BOX, (GREEN/WHITE, 49-Pin Plug) Pin 14 |
| FACTORY
ALARM DISARM |
GREEN (-), NOTE #2 |
@ DASH FUSE BOX, (LT.GREEN, 12-Pin Plug) Pin 4 |
| ANTI-THEFT |
HONDA'S TRANSPONDER SYSTEM, See NOTE #1 |
@ IGNITION TUMBLER |
| EXTRA
INFORMATION |
| NOTE #1: HONDA'S TRANSPONDER SYSTEM, Requires Bypass Module:
(For Remote Starting Only) Part #791 Bypass, (Requires Extra Key) for Operation.
(For Remote Starting Only) Part # PK-ALL Bypass. (No Extra Key Required for
Operation) 2-KEYS Required to Program Module.
(For Remote Starting/Door Locks) Part # DB-ALL (No Extra Key Required for Operation)
1-KEY Required for Programming.
To order please go to the SECURITY BYPASS MODULE Page or INTERFACE BYPASS
MODULE Page on this website.
NOTE #2: TEST this wire while turning the Key in the Drivers Door.
|
|
|
|
|
|
