Vehicle
Wiring Details for your
2009-2011 Chevrolet Traverse Wiring Diagram |
Printer Friendly
Version |
|
|
Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 2009-2011 Chevrolet Traverse . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
|
|
|
 |
| PART |
COLOR |
LOCATION |
| 12 VOLT
CONSTANT |
RED/BLACK (+) |
@ DASH FUSEBOX, BLACK, 84-PIN PLUG, PIN 5 |
| STARTER |
SEE NOTE #1 |
|
| STARTER
2 |
N/A |
|
| IGNITION
1 |
PINK (+) |
@ IGNITION SWITCH HARNESS or BCM, LT. GREEN PLUG, PIN 14, SEE NOTE #2 |
| IGNITION
2 |
N/A |
|
| IGNITION
3 |
N/A |
|
| ACCESSORY/HEATER
BLOWER 1 |
BROWN (+) |
@ IGNITION SWITCH HARNESS or BCM, LT. GREEN PLUG, PIN 21, SEE NOTE #2 |
| ACCESSORY/HEATER
BLOWER 2 |
N/A |
|
| KEYSENSE |
N/A |
|
| PARKING
LIGHTS ( - ) |
BROWN/WHITE (-) |
@ HEADLIGHT SWITCH or BCM, WHITE PLUG, PIN 8, SEE NOTE #2 |
| PARKING
LIGHTS ( + ) |
N/A |
|
| POWER LOCK |
SEE NOTE #1 |
|
| POWER UNLOCK |
SEE NOTE #1 |
|
| DOOR TRIGGER |
GRAY/BLACK (-) |
@ BCM, PINK PLUG, PIN 10, SEE NOTE #2 and NOTE #3 |
| DOMELIGHT
SUPERVISION |
GRAY/BLACK (+) |
@ BCM, WHITE PLUG, PIN 5, SEE NOTE #2 |
| TRUNK RELEASE |
GRAY (-) (REAR HANDLE SWITCH) |
@ BCM, PINK PLUG, PIN 23, SEE NOTE #2 |
| SLIDING
POWER DOOR |
N/A |
|
| HORN |
TAN (-) |
@ HORN SWITCH or BCM, BROWN PLUG, PIN 18, SEE NOTE #2 |
| TACH |
TAN (AC) |
@ ANY FUEL-INJECTOR, BLACK, 2-PIN PLUG, PIN 1 |
| WAIT TO
START LIGHT |
N/A |
|
| BRAKE |
LT. BLUE (+) |
@ BCM, BROWN PLUG, PIN 5, SEE NOTE #2 |
| FACTORY
ALARM DISARM |
DISARMS with FACTORY REMOTE ONLY!! |
|
| ANTI-THEFT |
GM'S MUTLIPLEX IGNITION/ANTI-THEFT SYSTEM, See NOTE #1 |
|
| EXTRA
INFORMATION |
| NOTE #1: This vehicle REQUIRES a Special INTERFACE BYPASS MODULE for REMOTE
STARTING/KEYLESS ENTRY , you MUST USE the INTERFACE BYPASS MODULE,
Part # DB-ALL or XK09, EITHER Bypass will do the Anti-theft, either Bypass Module will
also require Part # RFLCHGM,
to order go to the INTERFACE BYPASS MODULE Page on this website.
NOTE #2: The BCM is located UNDER the Drivers Side of the Dash and to the LEFT of the
Steering Column.
NOTE #3: On vehicles with EXPRESS up and down Power Windows, this wire is at the Drivers
window switch, BROWN 16-PIN PLUG, PIN 13
|
|
|
|
|
|
