Service: 954-728-9571
Items: 0 - Total: $0.00
See Cart | Check Out
About Us
What's New
Products
Contact Us
Current Specials!
Ordering Information
Our Terms
Shipping Information
Commando and Your Privacy

Search Again?

 

Need Installation?
Locate An Installer Near You That's Commando Authorized.
Are You An Installer?
Get Listed In our Commando Installer Database and Receive Installation Leads For Free!

Diagrams
Tech Support Home
Ignition & Starter
Starter Kill (3 Wire Harness)
(Download)
-------------------
Starter Kill (5 Wire Harness)
(Download)
-------------------
2nd Starter Wire Relay
(Download)
-------------------
Isolating Starter and Ignition Wires
(Download)
-------------------
Door Locks
Negative Pulse Door Locks
(Download)
-------------------
Positive Pulse Door Locks

(Download)
-------------------

Reverse Polarity Door Locks
(Download)
-------------------
Vacuum Type Door Locks
(Download)
-------------------
Mercedes Vacuum Door Locks
(Download)
-------------------
Toyota Child Safety Locks
(Download)
-------------------
Dodge Caravan Power Locks (Single Wire)

(Download)
-------------------
Ford Probe Door Locks
(Download)
-------------------
Door Lock Actuators
(Download)
-------------------
Trunk & Dome
Trunk Release Configurations
(Download)
-------------------
Domelight Supervision
(Download)
-------------------
Item Links!
Car Alarms
Car Alarm Combos
Alarm Acessories
Remote Car Starters
Keyless Entry
Motorcycle Alarms
Power Windows
Switch Kits
Tailgate Locks
Power Locks
Backup Alarms
Shaved Door Handles
FREE Vehicle Wiring
Diagrams & Charts
Select Your Make


Vehicle Wiring Details for your
2009- Volkswagen Eos Wiring Diagram
Printer Friendly
Version
Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 2009- Volkswagen Eos . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.


 PART   COLOR  LOCATION
 12 VOLT CONSTANT   BLACK/RED (+), 50 AMP   @ VESCM, (2-PIN PLUG(I), PIN 1, NOTE #2
 STARTER  RED/BLACK (+)  @ VESCM, (12-PIN PLUG(G), PIN 1, NOTE #2
 STARTER 2  N/A  
 IGNITION 1  BLACK (+)  @ VESCM, (12-PIN PLUG(G), PIN 11, NOTE #2
 IGNITION 2  N/A  
 IGNITION 3  N/A  
 ACCESSORY/HEATER BLOWER 1  N/A  
 ACCESSORY/HEATER BLOWER 2  N/A  
 KEYSENSE  N/A  
 PARKING LIGHTS ( - )  N/A  
 PARKING LIGHTS ( + )  GRAY/YELLOW (+), NOTE #6  @ VESCM, (16-PIN PLUG(E), PIN 1, NOTE #2
 POWER LOCK  BROWN/GREEN (-) NOTE #3  @ DDCM, (32-PIN PLUG), PIN 32, NOTE #4
 POWER UNLOCK  Use LOCK wire, (-) thru a 250 Ohm Resistor  
 DOOR TRIGGER  BROWN/YELLOW (-)  @ DDCM, (20-PIN PLUG), PIN 7, NOTE #4
 DOMELIGHT SUPERVISION  RED/PURPLE (-)  @ VESCM, (12-PIN PLUG(B), PIN 11, NOTE #2
 TRUNK RELEASE  PURPLE (-), NOTE #8  in DRIVERS KICK PANEL or CSCCM, (8-PIN PLUG), PIN 6, NOTE #5
 SLIDING POWER DOOR  N/A  
 HORN  BLACK/WHITE (+)  @ VESCM, (6-PIN PLUG(J), PIN 6, NOTE #2
 TACH  NOTE #9  @ Any FUEL-INJECTOR
 WAIT TO START LIGHT  N/A  
 BRAKE  BLACK/RED (+), (TEST with IGNITION KEY ON)  @ VESCM, (16-PIN PLUG(E), PIN 2, NOTE #2
 FACTORY ALARM DISARM   NOTE #7  @ DDCM, (20-PIN PLUG), PIN 16, NOTE #4
 ANTI-THEFT  VW'S TRANSPONDER ANTI-THEFT SYSTEM, Requires Bypass Module, See NOTE #1  @ IGNITION SWITCH TUMBLER
 EXTRA INFORMATION
 NOTE #1: VW'S TRANSPONDER ANTI-THEFT SYSTEM, Requires Bypass Module, Part # 791 Bypass Module, for REMOTE STARTING ONLY! Part # DLPK-CANBUS MULTI for REMOTE STARTING and DOOR LOCKS (Resistors for DOOR LOCKS, NOT REQUIRED) NOTE #2: the VESCM, (Vehicle Electrical System Control Module) is the RELAY BOX, Under the DRIVERS DASH. NOTE #3: this vehicle uses a 1-WIRE DOOR LOCKING SYSTEM, that Requires Extra Parts for operation. See DIAGRAM. The use of Bypass Module DLPK-CANBUS MULTI will do the ANTI-THEFT and DOOR LOCKS without the use of relays and resistors. NOTE #4: the DDCM, (Drivers Door Control Module) is located in the DRIVERS DOOR. NOTE #5: the CSCCM, ( Comfort System Central Control Module) is located behind the GLOVE BOX. NOTE #6: for the PARKING LIGHT FLASH option, it will be necessary to break the HEADLIGHT Switch OFF wire, BLACK/YELLOW (+), located at the VESCM, (16-PIN PLUG(E), PIN 16. NOTE #7: to DISARM FACTORY ALARM (if needed) Requires a (-) thru a 250 Ohm Resistor on the GREEN/WHITE (-) wire, requires resistor and relay. TEST this wire while turning the KEY in the DRIVERS DOOR. NOTE #8: TEST this wire while Opening the TRUNK with the Handle on the REAR of the Vehicle NOTE #9: when using the TACH wire, use a BROWN/BLACK, BROWN/WHITE, BROWN/PURPLE or BROWN/GRAY, they all test (AC)
 
Shop By Category!
Security Systems
Keyless Entry
Remote Starters
Power Door Locks
Power Windows
Shaved Door Handles
SPAL Cooling Fans
Solenoids & Actuators
Alarm Sensors
Installation Accessories
Keyword Search
 
Go Search!
Precision Search
Brand Search

 

 

View Details... CrimeStoppers - RS1 1-way Remote Starter and full keyless Entry System
$74.99

View Details... Electric Start 13Hp 6500 Watt Portable Gas Generator w/ wheels
$750.00

View Details... 4 Door Power Lock Kit with G20 Keyless Entry and Alarm
$94.99

View Details... Commando DL-100 Car Alarm, Keyless Entry Upgrade
$59.00

View Details... Baretta 2 Way LCD Pager/ Car Alarm Keyless Entry
$99.99

View Details... Commando 550-S Car Alarms with Full Keyless Entry
$59.99

View Details... 2000RS Remote Starter with Keyless Entry
$69.98

View Details... Avatal 3001L OEM security upgrade
$93.98

View Details... G20 Car Alarm w/Keyless Entry
$49.99

View Details... G20-PAC Car Alarm, Keyless Entry w/relay pack
$59.99