Vehicle
Wiring Details for your
2008-2012 Scion XD Wiring Diagram |
Printer Friendly
Version |
|
|
Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 2008-2012 Scion XD . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
|
|
|
 |
| PART |
COLOR |
LOCATION |
| 12 VOLT
CONSTANT |
GRAY (+) (15AMP) |
@ IGNITION SWITCH, (WHITE, 8-PIN PLUG), PIN 5 |
| STARTER |
BLACK (+) (X2) Common wire! |
@ IGNITION SWITCH, (WHITE, 8-PIN PLUG), PIN 7 |
| STARTER
2 |
N/A |
|
| IGNITION
1 |
PINK (+) |
@ IGNITION SWITCH, (WHITE, 8-PIN PLUG), PIN 6 |
| IGNITION
2 |
GREEN (+) |
@ IGNITION SWITCH, (WHITE, 8-PIN PLUG), PIN 1 |
| IGNITION
3 |
N/A |
|
| ACCESSORY/HEATER
BLOWER 1 |
WHITE (+) |
@ IGNITION SWITCH, (WHITE, 8-PIN PLUG), PIN 2 |
| ACCESSORY/HEATER
BLOWER 2 |
N/A |
|
| KEYSENSE |
N/A |
|
| PARKING
LIGHTS ( - ) |
WHITE (-) |
@ HEADLIGHT Switch, (WHITE, 13-PIN PLUG), PIN 13 |
| PARKING
LIGHTS ( + ) |
GREEN (+) |
@ DASH FUSE BOX, (WHITE, 30-PIN PLUG(A), PIN 29 |
| POWER LOCK |
BROWN to LT. GREEN (TYPE B), NOTE #2 |
in DRIVERS KICK PANEL, (WHITE, 20-PIN PLUG), PIN 5 |
| POWER UNLOCK |
TAN (TYPE B), NOTE #3 |
in DRIVERS KICK PANEL, (WHITE, 20-PIN PLUG), PIN 6 |
| DOOR TRIGGER |
RED (-) |
in DRIVERS KICK PANEL or DASH FUSE BOX, (WHITE, 20-PIN PLUG(A), PIN 21 |
| DOMELIGHT
SUPERVISION |
PINK (-) |
@ DASH FUSE BOX, (WHITE, 6-PIN PLUG(K), PIN 2 |
| TRUNK RELEASE |
YELLOW (-), NOTE #4 |
in DRIVERS KICK PANEL, Harness to REAR of Vehicle |
| SLIDING
POWER DOOR |
N/A |
|
| HORN |
BLACK (-) |
@ HORN SWITCH or DASH FUSE BOX, (WHITE, 32-PIN PLUG(E), PIN 18 |
| TACH |
RED, YELLOW, PINK or BLUE (AC) |
@ Any FUEL-INJECTOR |
| WAIT TO
START LIGHT |
N/A |
|
| BRAKE |
GREEN to PURPLE (+) |
@ BRAKE PEDAL SWITCH or DASH FUSE BOX, (WHITE, 30-PIN PLUG(A), PIN 12 |
| FACTORY
ALARM DISARM |
GREEN to YELLOW (-) Requires Double Pulse, NOTE #5 |
in DRIVERS KICK PANEL, (WHITE, 20-PIN PLUG), PIN 8 |
| ANTI-THEFT |
SCION'S TRANSPONDER ANTI-THEFT SYSTEM, See NOTE #1 |
TRANSPONDER @ IGNITION SWITCH TUMBLER |
| EXTRA
INFORMATION |
| NOTE #1: TOYOTA'S TRANSPONDER SYSTEM, Requires Bypass Module:
(For Remote Starting Only) Part #791 Bypass, (Requires Extra Key) for Operation.
(For Remote Starting Only) Part # PK-ALL Bypass. (No Extra Key Required for
Operation) 2-KEYS Required to Program Module.
(For Remote Starting/Door Locks) Part # DB-ALL (No Extra Key Required for Operation)
1-KEY Required for Programming.
To order please go to the SECURITY BYPASS MODULE Page or INTERFACE BYPASS
MODULE Page on this website.
NOTE #2: this wire is only needed if the Door Locks do not function with the Aftermarket System
while the vehicle is running. All other times just use the Factory Alarm Arm wire.
NOTE #3: this wire is only needed if the Door Locks do not function with the Aftermarket System
while the vehicle is running. All other times just use the Factory Alarm Disarm wire.
NOTE #4: TEST this wire while Opening the Hatch with the Handle on the REAR of the Vehicle.
NOTE #5: TEST this wire while turning the Key in the Drivers Door, this wire will also Unlock the
doors.
|
|
|
|
|
|
