Vehicle
Wiring Details for your
2008-2011 Subaru Impreza Wiring Diagram |
Printer Friendly
Version |
|
|
Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 2008-2011 Subaru Impreza . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
|
|
|
 |
| PART |
COLOR |
LOCATION |
| 12 VOLT
CONSTANT |
WHITE (+) |
@ IGNITION SWITCH, (WHITE, 6-PIN PLUG), PIN 3 |
| STARTER |
WHITE/BLACK (+) |
@ IGNITION SWITCH, (WHITE, 6-PIN PLUG), PIN 2 |
| STARTER
2 |
WHITE/RED (+) |
@ IGNITION SWITCH, (WHITE, 6-PIN PLUG), PIN 6 |
| IGNITION
1 |
GREEN (+) |
@ IGNITION SWITCH, (WHITE, 6-PIN PLUG), PIN 1 |
| IGNITION
2 |
N/A |
|
| IGNITION
3 |
N/A |
|
| ACCESSORY/HEATER
BLOWER 1 |
BLUE (+) |
@ IGNITION SWITCH, (WHITE, 6-PIN PLUG), PIN 4 |
| ACCESSORY/HEATER
BLOWER 2 |
YELLOW (+) |
@ IGNITION SWITCH, (WHITE, 6-PIN PLUG), PIN 5 |
| KEYSENSE |
N/A |
|
| PARKING
LIGHTS ( - ) |
BLACK/WHITE (-) |
@ LIGHTING SWITCHor BIU, (GRAY, 26-PIN PLUG), PIN 11, NOTE #2 |
| PARKING
LIGHTS ( + ) |
BLACK/WHITE (+) |
in DRIVERS KICK PANEL, Harness to REAR of Vehicle |
| POWER LOCK |
LIGHT GREEN (-),TYPE B |
in DRIVERS KICK PANEL or BIU, (GRAY, 35-PIN PLUG), PIN 15, NOTE #2 |
| POWER UNLOCK |
BLUE/BLACK (-),TYPE B |
in DRIVERS KICK PANEL or BIU, (GRAY, 35-PIN PLUG), PIN 29, NOTE #2 |
| DOOR TRIGGER |
BLUE/ORANGE (-) |
in DRIVERS KICK PANEL or BIU, (GRAY, 35-PIN PLUG), PIN 19, NOTE #2 |
| DOMELIGHT
SUPERVISION |
GREEN/YELLOW (-) |
in PASSENGER A Pillar or BIU, (WHITE, 30-PIN PLUG), PIN 5, NOTE #2 |
| TRUNK RELEASE |
GREEN/RED (-)(WAGON ONLY!), NOTE #3 |
in PASSENGER KICK PANEL or BIU, (WHITE, 28-PIN PLUG), PIN 24, NOTE #2 |
| SLIDING
POWER DOOR |
N/A |
|
| HORN |
BROWN to RED (-) |
@ HORN SWITCH or BIU, (WHITE, 30-PIN PLUG), PIN 29, NOTE #2 |
| TACH |
Any wire NOT YELLOW/GREEN, RED or BLACK/WHITE (AC) |
@ Any FUEL-INJECTOR |
| WAIT TO
START LIGHT |
N/A |
|
| BRAKE |
RED/WHITE or BROWN/WHITE to LT. GREEN (+) |
@ HORN SWITCH or BIU, (GRAY, 26-PIN PLUG), PIN 2, NOTE #2 |
| FACTORY
ALARM DISARM |
DISARMS with FACTORY REMOTE ONLY!! |
|
| ANTI-THEFT |
SUBARU'S TRANSPONDER ANTI-THEFT SYSTEM, Requires Bypass Module, See NOTE #1 |
@ IGNITION SWITCH TUMBLER |
| EXTRA
INFORMATION |
| NOTE #1: SUBARU'S TRANSPONDER ANTI-THEFT SYSTEM, Requires Bypass Module,
Part # 791 Bypass Module (for REMOTE STARTING)
NOTE #2: the BIU, (Body Integrated Unit) is located under the DRIVERS DASH, and to the
RIGHT of the STEERING COLUMN.
NOTE #3: TEST this wire while Opening the LIFTGATE from the Handle on the REAR of the
Vehicle. On SEDANS us theTRUNK RELEASE Motor wire.
|
|
|
|
|
|
