Vehicle
Wiring Details for your
2008-2011 Nissan Rogue Wiring Diagram |
Printer Friendly
Version |
|
|
Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 2008-2011 Nissan Rogue . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
|
|
|
 |
| PART |
COLOR |
LOCATION |
| 12 VOLT
CONSTANT |
BLUE (+) |
@ IGNITION SWITCH, (WHITE, 6-PIN PLUG), PIN 3 |
| STARTER |
RED (+) |
@ IGNITION SWITCH, (WHITE, 6-PIN PLUG), PIN 2 |
| STARTER
2 |
N/A |
|
| IGNITION
1 |
PINK (+) |
@ IGNITION SWITCH, (WHITE, 6-PIN PLUG), PIN 1 |
| IGNITION
2 |
N/A |
|
| IGNITION
3 |
N/A |
|
| ACCESSORY/HEATER
BLOWER 1 |
PINK (+) |
@ IGNITION SWITCH, (WHITE, 6-PIN PLUG), PIN 4 |
| ACCESSORY/HEATER
BLOWER 2 |
BROWN (+) |
@ IGNITION SWITCH, (WHITE, 6-PIN PLUG), PIN 5 |
| KEYSENSE |
N/A |
|
| PARKING
LIGHTS ( - ) |
N/A |
|
| PARKING
LIGHTS ( + ) |
RED (+) |
in DRIVERS KICK PANEL, Harness to REAR of Vehicle |
| POWER LOCK |
PINK (TYPE B) |
in DRIVERS KICK PANEL or BCM, (WHITE, 15-PIN PLUG) PIN 5, NOTE #2 |
| POWER UNLOCK |
BROWN(TYPE B) |
in DRIVERS KICK PANEL or BCM, (WHITE, 15-PIN PLUG) PIN 6, NOTE #2 |
| DOOR TRIGGER |
PINK to WHITE (-) |
in DRIVERS KICK PANEL or BCM, (WHITE, 15-PIN PLUG) PIN 7, NOTE #2 |
| DOMELIGHT
SUPERVISION |
RED (-) |
@ DRIVERS A Pillar or BCM, (BLACK, 15-PIN PLUG) PIN 8, NOTE #2 |
| TRUNK RELEASE |
LIGHT GREEN to GREEN (-), NOTE #3 |
in DRIVERS KICK PANEL or BCM, (WHITE, 40-PIN PLUG) PIN 30, NOTE #2 |
| SLIDING
POWER DOOR |
N/A |
|
| HORN |
GRAY (-) |
@ HORN Switch, (GRAY, 8-PIN PLUG), PIN 2 |
| TACH |
GRAY, BROWN, LT. GREEN or PINK (AC) |
@ Any FUEL-INJECTOR |
| WAIT TO
START LIGHT |
N/A |
|
| BRAKE |
YELLOW (+) |
@ BRAKE PEDAL Switch or in DRIVERS KICK PANEL, Harness to REAR of Vehicle |
| FACTORY
ALARM DISARM |
BLUE (-), Requires Double Pulse, NOTE #3 |
in DRIVERS KICK PANEL or BCM, (WHITE, 40-PIN PLUG) PIN 7, NOTE #2 |
| ANTI-THEFT |
NISSAN'S TRANSPONDER ANTI-THEFT SYSTEM, See NOTE #1 |
TRANSPONDER @ IGNITION SWITCH TUMBLER |
| EXTRA
INFORMATION |
| NOTE #1: This vehicle is Equipped with NISSAN'S TRANSPONDER ANTI-THEFT SYSTEM,
for REMOTE STARTING ONLY you will need the Part #791 BYPASS Module and an
Extra Ignition key. (Requires extra key for Operation)
Part # XK09 for REMOTE STARTING ONLY, requires 1 key for
programming, NO key required for Operation.
Part # DB-ALL for REMOTE START/KEYLESS Entry, requires 1 key for programming
and NO Key for Operation.
To Order the go to the SECURITY BYPASS MODULE Page or INTERFACE BYPASS
MODULE Page on this website.
NOTE #2: the BCM (Body Control Module) is located Behind the GLOVE BOX.
NOTE #3: TEST this wire while Turning the KEY in the Drivers Door. This wire will also DISARM the
FACTORY ALARM.
|
|
|
|
|
|
