Vehicle
Wiring Details for your
2008-2011 Mazda Tribute Wiring Diagram |
Printer Friendly Version |
|
|
Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 2008-2011 Mazda Tribute . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
|
|
|
|
PART |
COLOR |
LOCATION |
12 VOLT
CONSTANT |
YELLOW/RED (+) |
@ SJB, (1-PIN PLUG(G), PIN 1, NOTE #2 |
STARTER |
BLUE/WHITE (+) |
@ IGNITION SWITCH, (7-PIN PLUG), PIN 7 |
STARTER
2 |
N/A |
|
IGNITION
1 |
WHITE/ORANGE (+) |
@ IGNITION SWITCH, (7-PIN PLUG), PIN 1 |
IGNITION
2 |
N/A |
|
IGNITION
3 |
N/A |
|
ACCESSORY/HEATER
BLOWER 1 |
PURPLE/GREEN (+) |
@ IGNITION SWITCH, (7-PIN PLUG), PIN 6 |
ACCESSORY/HEATER
BLOWER 2 |
N/A |
|
KEYSENSE |
N/A |
|
PARKING
LIGHTS ( - ) |
N/A |
|
PARKING
LIGHTS ( + ) |
PURPLE/WHITE (+) |
in DRIVERS KICK PANEL or SJB, (32-PIN PLUG(D), PIN 20, NOTE #2 |
POWER LOCK |
BLUE/GREEN (TYPE B) |
in DRIVERS KICK PANEL or SJB, (26-PIN PLUG(C), PIN 17, NOTE #2 |
POWER UNLOCK |
YELLOW/PURPLE (TYPE B) |
in DRIVERS KICK PANEL or SJB, (26-PIN PLUG(C), PIN 4, NOTE #2 |
DOOR TRIGGER |
GREEN/PURPLE (-) N.C. |
in DRIVERS KICK PANEL or SJB, (26-PIN PLUG(C), PIN 14, NOTE #2 |
DOMELIGHT
SUPERVISION |
GRAY/PURPLE (+) |
in DRIVERS KICK PANEL or SJB, (14-PIN PLUG(A), PIN 9, NOTE #2 |
TRUNK RELEASE |
BROWN (-)(Liftgate) BROWN/YELLOW (-)(Glass) |
in DRIVERS KICK PANEL or SJB, (26-PIN PLUG(C), PINS 7 and 20, NOTE #2 |
SLIDING
POWER DOOR |
N/A |
|
HORN |
BROWN (-) |
@ HORN SWITCH or SJB, (52-PIN PLUG(b), PIN 41, NOTE #2 |
TACH |
Any wire NOT BLUE (AC) |
@ Any FUEL -INJECTOR |
WAIT TO
START LIGHT |
N/A |
|
BRAKE |
PURPLE/WHITE (+) |
@ BRAKE PEDAL SWITCH, in DRIVERS KICK PANEL or SJB, (52-PIN PLUG(B), PIN 40, NOTE #2 |
FACTORY
ALARM DISARM |
N/A |
|
ANTI-THEFT |
MAZDA'S TRANSPONDER ANTI-THEF SYSTEM, See NOTE #1 |
TRANSPONDER @ IGNITION SWITCH TUMBLER |
EXTRA
INFORMATION |
NOTE #1: This vehicle is with MAZDA'S TRANSPONDER ANTI-THEFT SYSTEM,
for REMOTE STARTING ONLY you will need the Part #791 BYPASS Module and an
Extra Ignition key. (Requires extra key for Operation)
Part # PK-ALL or PKFM for REMOTE STARTING ONLY, requires 2 keys for
programming, NO key required for Operation.
To Order the go to the SECURITY BYPASS MODULE Page or INTERFACE BYPASS
MODULE Page on this website.
NOTE #2: the SJB, (Smart Junction Block) is the FUSE BOX in the Front Passenger side of the
Center Console.
|
|
|
|
|