Vehicle
Wiring Details for your
2008-2010 Honda Odyssey Wiring Diagram |
Printer Friendly
Version |
|
|
Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 2008-2010 Honda Odyssey . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
|
|
|
 |
| PART |
COLOR |
LOCATION |
| 12 VOLT
CONSTANT |
WHITE (+) |
@ IGNITION SWITCH, (BROWN, 7-Pin Plug) Pin 3 |
| STARTER |
BLACK/WHITE (+) |
@ IGNITION SWITCH, (BROWN, 7-Pin Plug) Pin 1 |
| STARTER
2 |
N/A |
|
| IGNITION
1 |
BLACK/YELLOW (+) |
@ IGNITION SWITCH, (BROWN, 7-Pin Plug) Pin 6 |
| IGNITION
2 |
N/A |
|
| IGNITION
3 |
N/A |
|
| ACCESSORY/HEATER
BLOWER 1 |
BLACK/RED (+) |
@ IGNITION SWITCH, (BROWN, 7-Pin Plug) Pin 4 |
| ACCESSORY/HEATER
BLOWER 2 |
BLACK/WHITE (+) |
@ IGNITION SWITCH, (BROWN, 7-Pin Plug) Pin 5 |
| KEYSENSE |
N/A |
|
| PARKING
LIGHTS ( - ) |
RED/BLACK (-) |
@ WIPER SWITCH, (BLACK/WHITE, 12-Pin Plug) Pin 7 |
| PARKING
LIGHTS ( + ) |
RED/BLACK (+) |
in DRIVERS KICK PANEL, Harness to Rear of Vehicle |
| POWER LOCK |
PINK/BLACK (TYPE B) |
@ MICU, (LT. GREEN, 30-Pin Plug) Pin 20, NOTE #2 |
| POWER UNLOCK |
GREEN (TYPE B) |
@ MICU, (LT. GREEN, 30-Pin Plug) Pin 6, NOTE #2 |
| DOOR TRIGGER |
GREEN (-) |
in DRIVERS KICK PANEL, Harness to Rear of Vehicle |
| DOMELIGHT
SUPERVISION |
BLACK/RED (-) |
@ INTERIOR LIGHT SWITCH on Dash, (GRAY, 6-Pin Plug) Pin 4 |
| TRUNK RELEASE |
WHITE/BLACK and YELLOW/BLACK , See NOTE #3 |
@ POWER TAILGATE SWITCH, (LT. GREEN,5-Pin Plug) Pins 2 and 1 |
| SLIDING
POWER DOOR |
N/A |
|
| HORN |
GREEN/YELLOW (-) |
@ PARKING BRAKE Bracket, (WHITE, 20-Pin Plug) Pin 19 |
| TACH |
Any wire NOT YELLOW/BLACK (AC) |
@ Any FUEL-INJECTOR |
| WAIT TO
START LIGHT |
N/A |
|
| BRAKE |
WHITE/BLACK (+) |
@ DRIVERS FUSE BOX, (WHITE, 45-Pin Plug) Pin 34 |
| FACTORY
ALARM DISARM |
BLACK/RED to WHITE (-) |
@ POWER WINDOW MASTER SWITCH, (WHITE, 23-Pin Plug) Pin 21 |
| ANTI-THEFT |
HONDA'S TRANPONDER ANTI-THEFT SYSTEM, See NOTE #1 |
|
| EXTRA
INFORMATION |
| NOTE #1: HONDA'S TRANSPONDER SYSTEM, Requires Bypass Module:
(For Remote Starting Only) Part #791 Bypass, (Requires Extra Key) for Operation.
(For Remote Starting Only) Part # PK-ALL Bypass. (No Extra Key Required for
Operation) 2-KEYS Required to Program Module.
(For Remote Starting/Door Locks) Part # DB-ALL (No Extra Key Required for Operation)
1-KEY Required for Programming.
To order please go to the SECURITY BYPASS MODULE Page or INTERFACE BYPASS
MODULE Page on this website.
NOTE #2: the MICU (Multiplex Integrated Control Unit) is part of the Driver Fuse Box,
located in the Drivers Kick, it has 2 Plugs on the Right side edge of the Fuse Box.
NOTE #3: these (2) wires SHORT when the POWER TAILGATE Switch is Pressed.
|
|
|
|
|
|
