Vehicle
Wiring Details for your
2008-2009 Toyota Prius Wiring Diagram |
Printer Friendly
Version |
|
|
Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 2008-2009 Toyota Prius . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
|
|
|
 |
| PART |
COLOR |
LOCATION |
| 12 VOLT
CONSTANT |
WHITE (+) |
@ DASH FUSE BOX, (WHITE, 1-Pin Plug(B) Pin 1 |
| STARTER |
BLACK (-) |
@ POWER SWITCH, (BLACK, 8-Pin Plug) Pin 5 |
| STARTER
2 |
YELLOW (-) |
@ POWER SWITCH, (BLACK, 8-Pin Plug) Pin 7 |
| IGNITION
1 |
BLACK (+) |
@ DASH FUSE BOX, (WHITE, 8-Pin Plug(J) Pin 4 |
| IGNITION
2 |
BLACK (+) (Low Current) |
@ DASH FUSE BOX, (WHITE, 8-Pin Plug(J) Pin 3 |
| IGNITION
3 |
N/A |
|
| ACCESSORY/HEATER
BLOWER 1 |
GREEN (+) |
@ DASH FUSE BOX, (WHITE, 8-Pin Plug(J) Pin 5 |
| ACCESSORY/HEATER
BLOWER 2 |
N/A |
|
| KEYSENSE |
N/A |
|
| PARKING
LIGHTS ( - ) |
YELLOW (-) |
@ HEADLIGHT Switch, (WHITE, 20-Pin Plug) Pin 18 |
| PARKING
LIGHTS ( + ) |
BROWN (+) |
@ DASH FUSE BOX, (WHITE, 30-Pin Plug(D) Pin 29 |
| POWER LOCK |
LT. GREEN (TYPE B), NOTE #2 |
in DRIVERS KICK PANEL, (WHITE, 8-Pin Plug) Pin 6 |
| POWER UNLOCK |
BROWN (TYPE B), NOTE #3 |
in DRIVERS KICK PANEL, (WHITE, 8-Pin Plug) Pin 7 |
| DOOR TRIGGER |
PURPLE (-) |
@ DASH FUSE BOX, (WHITE, 30-Pin Plug(D) Pin 21 |
| DOMELIGHT
SUPERVISION |
BLUE (-) |
@ DASH FUSE BOX, (WHITE, 6-Pin Plug(O) Pin 2 |
| TRUNK RELEASE |
PINK (-) NOTE #4 |
in DRIVERS KICK PANEL, (WHITE, 22-Pin Plug) Pin 17 |
| SLIDING
POWER DOOR |
N/A |
|
| HORN |
ORANGE to YELLOW (-) |
@ HORN SWITCH or DASH FUSE BOX, (WHITE, 32-Pin Plug(E) Pin 25 |
| TACH |
N/A |
|
| WAIT TO
START LIGHT |
N/A |
|
| BRAKE |
BLUE (+) |
@ BRAKE SWITCH or in DRIVERS KICK PANEL, (WHITE, 11-Pin Plug) Pin 5 |
| FACTORY
ALARM DISARM |
PINK (-) Requires Double Pulse, NOTE #5 |
in DRIVERS KICK PANEL, (BLUE, 18-Pin Plug) Pin 13 |
| ANTI-THEFT |
TOYOTA'S TRANSPONDER SYSTEM, See NOTE #1 |
|
| EXTRA
INFORMATION |
| NOTE #1: This vehicle is equipped with TOYOTA'S TRANSPONDER ANTI-THEFT SYSTEM that
Requires a Bypass Module for REMOTE STARTING:
Part 791 Bypass Module, Requires Extra Key for Operation or Part PK-ALL Bypass
Module, DOES NOT Require Key for Operation but does require 2 keys for the
programming of the bypass.
NOTE #2: this wire is only needed if the Door Locks do not function with the Aftermarket System
while the vehicle is running. All other times just use the Factory Alarm Arm wire.
NOTE #3: this wire is only needed if the Door Locks do not function with the Aftermarket System
while the vehicle is running. All other times just use the Factory Alarm Disarm wire.
NOTE #4: TEST this wire while opening the Hatch with the Handle on the Rear of the Vehicle.
NOTE #5: TEST this wire while turning the Key in the Drivers Door, this wire will also Unlock
the Doors.
|
|
|
|
|
|
