Vehicle
Wiring Details for your
2008-2009 Mazda B-Series Wiring Diagram |
Printer Friendly Version |
|
|
Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 2008-2009 Mazda B-Series . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
|
|
|
|
PART |
COLOR |
LOCATION |
12 VOLT
CONSTANT |
RED (+) |
@ IGNITION SWITCH, (13-PIN PLUG), PIN 2 |
STARTER |
BLUE/WHITE (+) |
@ IGNITION SWITCH, (13-PIN PLUG), PIN 5 |
STARTER
2 |
N/A |
|
IGNITION
1 |
WHITE/ORANGE (+) |
@ IGNITION SWITCH, (13-PIN PLUG), PIN 1 |
IGNITION
2 |
N/A |
|
IGNITION
3 |
N/A |
|
ACCESSORY/HEATER
BLOWER 1 |
BROWN/YELLOW (+) |
@ IGNITION SWITCH, (13-PIN PLUG), PIN 8 |
ACCESSORY/HEATER
BLOWER 2 |
PURPLE/GREEN (+) |
@ IGNITION SWITCH, (13-PIN PLUG), PIN 3 |
KEYSENSE |
N/A |
|
PARKING
LIGHTS ( - ) |
N/A |
|
PARKING
LIGHTS ( + ) |
PURPLE/WHITE (+) |
@ HEADLIGHT Switch or SJB, (Connector D), PIN 5, NOTE #2 |
POWER LOCK |
GRAY/YELLOW (TYPE B) |
in DRIVERS KICK PANEL or SJB, (Connector C), PIN 5, NOTE #2 |
POWER UNLOCK |
PURPLE/GRAY (TYPE B) |
in DRIVERS KICK PANEL or SJB, (Connector C), PIN 9, NOTE #2 |
DOOR TRIGGER |
GREEN/PURPLE (-) |
in DRIVERS KICK PANEL or SJB, (Connector C), PIN 6, NOTE #2 |
DOMELIGHT
SUPERVISION |
GREEN/BLUE (+) |
@ SJB, (Connector C), PIN 6, NOTE #2 |
TRUNK RELEASE |
N/A |
|
SLIDING
POWER DOOR |
N/A |
|
HORN |
YELLOW/LT. GREEN to YELLOW/RED (-) |
@ HORN SWITCH or SJB, (Connector D), PIN 12, NOTE #2 |
TACH |
Any wire NOT BROWN/WHITE (AC) |
@ Any FUEL-INJECTOR |
WAIT TO
START LIGHT |
N/A |
|
BRAKE |
PURPLE/WHITE (+) |
@ BRAKE PEDAL SWITCH |
FACTORY
ALARM DISARM |
N/A |
|
ANTI-THEFT |
MAZDA'S TRANSPONDER ANTI-THEFT SYSTEM, See NOTE #1 |
@ IGNITION SWITCH TUMBLER |
EXTRA
INFORMATION |
NOTE #1: This vehicle May Be Equipped with FORD'S TRANSPONDER ANTI-THEFT SYSTEM,
check the OWNERS MANUAL for this vehcile or contact your HYUNDAI Dealer to see if
the vehicle has a Special programmed Ignition Key, if it does, then for REMOTE
STARTING you will need the 791 BYPASS Module and an Extra Ignition key.
To Order the 791 go to the SECURITY BYPASS MODULE Page on this website.
NOTE #2: the SJB, (Smart Junction Box) is located in the PASSENGER Kick Panel.
|
|
|
|
|