Vehicle
Wiring Details for your
2008-2009 Infiniti G37 Wiring Diagram |
Printer Friendly Version |
|
|
Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 2008-2009 Infiniti G37 . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
|
|
|
|
PART |
COLOR |
LOCATION |
12 VOLT
CONSTANT |
WHITE (+) |
@ BCM, (BLACK, 3-PIN PLUG), PIN 1, NOTE #2 |
STARTER |
BROWN (-) |
@ PUSH-BUTTON IGNITION Switch or BCM, (BLACK, 40-PIN PLUG), PIN 18, NOTE #2 |
STARTER
2 |
LT. BLUE (-) |
@ BCM, (GRAY, 40-PIN PLUG), PIN 21, NOTE #2 |
IGNITION
1 |
RED (+) |
@ BCM, (BLACK, 40-PIN PLUG), PIN 11, NOTE #2 |
IGNITION
2 |
YELLOW (-) |
@ BCM, (GRAY, 40-PIN PLUG), PIN 16, NOTE #2 |
IGNITION
3 |
N/A |
|
ACCESSORY/HEATER
BLOWER 1 |
ORANGE (+) |
@ BCM, (BLACK, 40-PIN PLUG), PIN 31, NOTE #2 |
ACCESSORY/HEATER
BLOWER 2 |
ORANGE (+) |
@ BCM, (BLACK, 40-PIN PLUG), PIN 24, NOTE #2 |
KEYSENSE |
N/A |
|
PARKING
LIGHTS ( - ) |
N/A |
|
PARKING
LIGHTS ( + ) |
RED (+) |
@ DASH FUSE BOX, (WHITE, 10-PIN PLUG), PIN 5 |
POWER LOCK |
NOTE #3 |
@ POWER WINDOW Main Switch, (WHITE, 16-PIN PLUG), PIN 4 or 6 |
POWER UNLOCK |
NOTE #4 |
@ POWER WINDOW Main Switch, (WHITE, 16-PIN PLUG), PIN 6 or 7 |
DOOR TRIGGER |
NOTE #6 |
@ BCM, (GREEN, 40-PIN PLUG), PIN 39, NOTE #2 |
DOMELIGHT
SUPERVISION |
PURPLE (-) |
@ BCM, (WHITE, 16-PIN PLUG), PIN 16, NOTE #2 |
TRUNK RELEASE |
GRAY (-) |
@ BCM, (GRAY, 40-PIN PLUG), PIN 36, NOTE #2 |
SLIDING
POWER DOOR |
N/A |
|
HORN |
LT. GREEN (-) |
@ HORN Switch, (GRAY, 8-PIN PLUG), PIN 8, under Steering Column cover |
TACH |
RED (AC) |
@ PSCU, (WHITE, 12-PIN PLUG), PIN 10, NOTE #5 |
WAIT TO
START LIGHT |
N/A |
|
BRAKE |
BROWN (+) |
@ BCM, (GREEN, 40-PIN PLUG), PIN 7, NOTE #2 |
FACTORY
ALARM DISARM |
Use UNLOCK wire |
|
ANTI-THEFT |
INFINITI'S TRANSPONDER ANTI-THEFT SYSTEM, Requires Bypass Module, See NOTE #1 |
|
EXTRA
INFORMATION |
NOTE #1: This vehicle is equipped with INFINITI'S TRANSPONDER ANTI-THEFT System that
requires a Bypass Module for Remote Starting:
Part# 791 Bypass Module (Key Required) requires an Extra Ignition Key placed inside
module for Operation FOR REMOTE STARTING ONLY!!.
Part # XK09 Bypass Module (No Key Require in Module) FOR REMOTE STARTING
ONLY!!
Part # DB-ALL Interface Bypass Module (No Key Required) this bypass is for Remote
Starting and does the door locks (keyless entry), truck release, parking lights and
Brake connection.
To order go to the INTERFACE BYPASS MODULE Page on this website.
NOTE #2: the BCM (Body Control Module) is located in the PASSENGER KICK PANEL.
NOTE #3: TEST this wire while Turning the KEY in the Drivers Door. This wire will also ARM the
FACTORY ALARM. The LOCK wire is a PURPLE (-), TYPE B, (Sedan and Convertible),
GRAY (-) TYPE B, (Coupe)
NOTE #4: TEST this wire while Turning the KEY in the Drivers Door. This wire will also DISARM the
FACTORY ALARM. The UNLOCK wire is a YELLOW (-), TYPE B, (Sedan), WHITE (-)
(Coupe and Convertible) Requires Double Pulse.
NOTE #5: the PSCU, (Power Steering Control Unit) is located under the PASSENGER DASH,
behind the GLOVE BOX.
NOTE #6: the DOOR TIGGER wire is GRAY (-), (Sedan and Convertible) and RED (-) (Coupe)
|
|
|
|
|