Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 2008 - Pontiac G6 . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
PART
COLOR
LOCATION
12 VOLT
CONSTANT
RED/WHITE (+)
IGNITION SWITCH HARNESS
STARTER
SEE NOTE *
STARTER
2
N/A
N/A
IGNITION
1
PINK (+)
IGNITION SWITCH HARNESS
IGNITION
2
N/A
N/A
IGNITION
3
N/A
N/A
ACCESSORY/HEATER
BLOWER 1
BROWN (+)
IGNITION SWITCH HARNESS
ACCESSORY/HEATER
BLOWER 2
N/A
N/A
KEYSENSE
N/A
N/A
PARKING
LIGHTS ( - )
BROWN/WHITE (-)
AT BCM ON THE FRONT PASSENGER SIDE OF CENTER CONSOLE
PARKING
LIGHTS ( + )
BROWN (+)
AT BCM ON THE FRONT PASSENGER SIDE OF THE CENTER CONSOLE
POWER LOCK
WHITE (-) SEE NOTE **
SEE DIAGRAM
POWER UNLOCK
SAME AS LOCK WIRE
SEE DIAGRAM
DOOR TRIGGER
GRAY/BLACK (-)
IN DRIVERS KICK PANEL
DOMELIGHT
SUPERVISION
GRAY (-)
AT BCM ON THE FRONT PASSENGER SIDE OF THE CENTER CONSOLE
TRUNK RELEASE
BROWN/WHITE (-)
LOW IN DRIVERS KICK PANEL
SLIDING
POWER DOOR
N/A
N/A
HORN
TAN (-)
AT STEERING COLUMN HARNESS
TACH
NOT PINK
AT FUEL INJECTOR
WAIT TO
START LIGHT
N/A
N/A
BRAKE
WHITE (+)
AT BCM ON THE FRONT PASSENGER SIDE OF THE CENTER CONSOLE
FACTORY
ALARM DISARM
DISARMS WITH FACTORY REMOTE ONLY!!
ANTI-THEFT
TRANSPONDER ANTI-THEFT
TRANSPONDER @ IGNITION SWITCH TUMBLER
EXTRA
INFORMATION
NOTES
NOTE * THIS VEHICLE HAS A SPECIAL IGNITION AND WILL REQUIRE A PKUGM2X FOR REMOTE START AND ANTI-THEFT.
NOTE ** THIS VEHICLE USES A SINGLE WIRE DOORLOCKING SYSTEM THAT REQUIRES EXTRA PARTS. SEE DIAGRAM.
