Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 2008 - Dodge Viper . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
PART
COLOR
LOCATION
12 VOLT
CONSTANT
RED (+)
STARTER
YELLOW/RED (+)
STARTER
2
N/A
IGNITION
1
DARK BLUE (+)
IGNITION
2
N/A
IGNITION
3
N/A
ACCESSORY/HEATER
BLOWER 1
N/A
ACCESSORY/HEATER
BLOWER 2
N/A
KEYSENSE
N/A
PARKING
LIGHTS ( - )
WHITE (-) SEE NOTE *
AT BCM
PARKING
LIGHTS ( + )
N/A
N/A
POWER LOCK
NO INFORMATION AT THIS TIME
POWER UNLOCK
NO INFORMATION AT THIS TIME
DOOR TRIGGER
SEE NOTE **
AT BCM
DOMELIGHT
SUPERVISION
TAN (-)
AT BCM
TRUNK RELEASE
LIGHT GREEN/BLACK (+)
AT BCM
SLIDING
POWER DOOR
N/A
N/A
HORN
BLACK/RED (-)
AT STEERING COLUMN HARNESS
TACH
N/A
N/A
WAIT TO
START LIGHT
N/A
N/A
BRAKE
WHITE/TAN (+)
AT SWITCH ABOVE BRAKE PEDAL
FACTORY
ALARM DISARM
N/A
N/A
ANTI-THEFT
TRANSPONDER ANTI-THEFT
TRANSPONDER @ IGNITION SWITCH TUMBLER
EXTRA
INFORMATION
NOTE * THE BCM IS LOCATED IN THE DRIVERS KICK PANEL.
NOTE ** THE LEFT FRONT DOOR IS TAN (-). THE RIGHT FRONT DOOR IS TAN/RED(-). USE BOTH WIRES AND DIODE ISOLATE BOTH.
