Vehicle
Wiring Details for your
2007-2011 Suzuki Sx4 Wiring Diagram |
Printer Friendly
Version |
|
|
Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 2007-2011 Suzuki Sx4 . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
|
|
|
 |
| PART |
COLOR |
LOCATION |
| 12 VOLT
CONSTANT |
WHITE/BLUE (+) 50 AMP |
@ IGNITION SWITCH, (6-PIN PLUG), PIN 3 |
| STARTER |
GREEN/WHITE (+) |
@ IGNITION SWITCH, (6-PIN PLUG), PIN 2 |
| STARTER
2 |
N/A |
|
| IGNITION
1 |
GREEN (+) |
@ IGNITION SWITCH, (6-PIN PLUG), PIN 6 |
| IGNITION
2 |
N/A |
|
| IGNITION
3 |
N/A |
|
| ACCESSORY/HEATER
BLOWER 1 |
YELLOW (+) |
@ IGNITION SWITCH, (6-PIN PLUG), PIN 1 |
| ACCESSORY/HEATER
BLOWER 2 |
BLUE (+) |
@ IGNITION SWITCH, (6-PIN PLUG), PIN 5 |
| KEYSENSE |
N/A |
|
| PARKING
LIGHTS ( - ) |
RED/YELLOW (-) |
@ HEADLIGHT SWITCH or BCM, (24-PIN PLUG), PIN 11, NOTE #1 |
| PARKING
LIGHTS ( + ) |
RED/YELLOW (+) |
in DRIVERS KICK PANEL or FUSE BOX, (20-PIN PLUG), PIN 18 |
| POWER LOCK |
GRAY/WHITE(-), TYPE B |
in DRIVERS KICK PANEL or BCM, (40-PIN PLUG), PIN 27, NOTE #1 |
| POWER UNLOCK |
GRAY/RED(-), TYPE B |
in DRIVERS KICK PANEL or BCM, (40-PIN PLUG), PIN 26, NOTE #1 |
| DOOR TRIGGER |
BLACK/BLUE (-) |
in DRIVERS KICK PANEL or BCM, (40-PIN PLUG), PIN 39, NOTE #1 |
| DOMELIGHT
SUPERVISION |
WHITE (-) |
in DRIVERS KICK PANEL or BCM, (BLACK, 15-PIN PLUG), PIN 15, NOTE #1 |
| TRUNK RELEASE |
Use TRUNK RELEASE Motor(Sedan), WHITE/RED(-)(Hatchback), NOTE #3 |
in PASSENGER KICK PANEL or BCM, (40-PIN PLUG), PIN 30, NOTE #1 |
| SLIDING
POWER DOOR |
N/A |
|
| HORN |
BLUE (-) |
@ HORN SWITCH or BCM, (40-PIN PLUG), PIN 15, NOTE #1 |
| TACH |
Any wire NOT BLACK/RED (AC) |
@ Any FUEL-INJECTOR |
| WAIT TO
START LIGHT |
N/A |
|
| BRAKE |
GREEN/WHITE (+) |
@ BRAKE PEDAL SWITCH or in DRIVERS KICK PANEL, HARNESS to REAR of VEHICLE |
| FACTORY
ALARM DISARM |
BROWN (-), Requires Double Pulse, NOTE #2 |
in DRIVERS KICK PANEL or BCM, (40-PIN PLUG), PIN 36, NOTE #1 |
| ANTI-THEFT |
SUZUKI'S TRANSPONDER ANTI-THEFT SYSTEM, Requires Bypass Module, See NOTE #4 |
TRANSPONDER @ IGNITION SWITCH TUMBLER |
| EXTRA
INFORMATION |
| NOTE #1: the BCM, (Body Control Module) is located under the DRIVERS DASH, and is attached
to the TOP of the FUSE BOX
NOTE #2: TEST this wire while Turning the Key in the Drivers Door.
NOTE #3: TEST this wire while Opening the HATCH from the Handle on the REAR of the Vehicle
NOTE #4: SUZUKI'S TRANSPONDER ANTI-THEFT SYSTEM, Requires Bypass Module,
Part # 791Bypass Module for REMOTE START
|
|
|
|
|
|
