Vehicle
Wiring Details for your
2007-2011 Chevrolet Equinox Wiring Diagram |
Printer Friendly Version |
|
|
Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 2007-2011 Chevrolet Equinox . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
|
|
|
 |
PART |
COLOR |
LOCATION |
12 VOLT
CONSTANT |
CONNECT to BATTERY |
|
STARTER |
SEE NOTE #1 |
|
STARTER
2 |
N/A |
|
IGNITION
1 |
PINK (+) |
@ IGNITION SWITCH HARNESS or BCM, LT. GREEN PLUG, PIN 14, SEE NOTE #2 |
IGNITION
2 |
N/A |
|
IGNITION
3 |
N/A |
|
ACCESSORY/HEATER
BLOWER 1 |
BROWN (+) |
@ IGNITION SWITCH HARNESS or BCM, LT. GREEN PLUG, PIN 21, SEE NOTE #2 |
ACCESSORY/HEATER
BLOWER 2 |
N/A |
|
KEYSENSE |
N/A |
|
PARKING
LIGHTS ( - ) |
WHITE (-) |
|
PARKING
LIGHTS ( + ) |
N/A |
|
POWER LOCK |
PINK/BLACK (TYPE B) |
IN DRIVERS KICK or BCM, GRAY PLUG, PIN 12, SEE NOTE #2 |
POWER UNLOCK |
ORANGE/BLACK (TYPE B) |
IN DRIVERS KICK or BCM, GRAY PLUG, PIN 11, SEE NOTE #2 |
DOOR TRIGGER |
GRAY/BLACK (-) |
IN DRIVERS DOOR @ WINDOW SWITCH, BLACK 8-PIN PLUG, PIN 6 |
DOMELIGHT
SUPERVISION |
DK. BLUE/WHITE (-) |
@ BCM, PINK PLUG, PIN 1, SEE NOTE #2 |
TRUNK RELEASE |
GRAY (-) SEE NOTE #3 |
@ BCM, PINK PLUG, PIN 15, SEE NOTE #2 |
SLIDING
POWER DOOR |
N/A |
|
HORN |
TAN (-) |
@ HORN SWITCH or BCM, BROWN PLUG, PIN 18, SEE NOTE #2 |
TACH |
Any wire NOT PINK or PINK/BLACK (AC) |
@ ANY FUEL-INJECTOR |
WAIT TO
START LIGHT |
N/A |
|
BRAKE |
LT. BLUE (+) |
@ BCM, BROWN PLUG, PIN 5, SEE NOTE #2 |
FACTORY
ALARM DISARM |
DISARMS WITH FACTORY REMOTE ONLY!! |
|
ANTI-THEFT |
GM'S MULTIPLEX IGNITION/ANTI-THEFT SYSTEM, See NOTE #1 |
|
EXTRA
INFORMATION |
NOTE #1; This vehicle is equipped with GM'S MULTIPLEX IGNITION/ANTI-THEFT SYSTEM and
requires a Special INTERFACE BYPASS MODULE to REMOTE START, Part # DB-ALL,
to order please go to the INTERFACE BYPASS MODULE Page on this website.
NOTE #2: The BCM is located under Drivers side of dash above E-Brake
NOTE #3: TEST this wire while opening the Hatch with the handle on the Rear of the Vehicle.
|
|
|
|
|