Vehicle
Wiring Details for your
2007-2010 Hyundai Entourage Wiring Diagram |
Printer Friendly Version |
|
|
Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 2007-2010 Hyundai Entourage . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
|
|
|
 |
PART |
COLOR |
LOCATION |
12 VOLT
CONSTANT |
WHITE (+) |
@ IGNITION SWITCH, (WHITE, 6-PIN PLUG), PIN 5 |
STARTER |
ORANGE (+) |
@ IGNITION SWITCH, (WHITE, 6-PIN PLUG), PIN 1 |
STARTER
2 |
N/A |
|
IGNITION
1 |
GREEN (+) |
@ IGNITION SWITCH, (WHITE, 6-PIN PLUG), PIN 6 |
IGNITION
2 |
N/A |
|
IGNITION
3 |
N/A |
|
ACCESSORY/HEATER
BLOWER 1 |
BLUE (+) |
@ IGNITION SWITCH, (WHITE, 6-PIN PLUG), PIN 3 |
ACCESSORY/HEATER
BLOWER 2 |
PINK (+) |
@ IGNITION SWITCH, (WHITE, 6-PIN PLUG), PIN 4 |
KEYSENSE |
N/A |
|
PARKING
LIGHTS ( - ) |
BLUE (-) |
@ HEADLIGHT SWITCH or IPM, (BLUE, 72-PIN PLUG), PIN 69, NOTE #2 |
PARKING
LIGHTS ( + ) |
N/A |
|
POWER LOCK |
ORANGE (TYPE B), NOTE #5 |
@ DDM, (GRAY, 16-PIN PLUG), PIN 3, NOTE #3 |
POWER UNLOCK |
RED (TYPE B), Requires Double Pulse, NOTE #5 |
@ DDM, (GRAY, 16-PIN PLUG), PIN 1, NOTE #3 |
DOOR TRIGGER |
YELLOW (-) |
@ RAM, (RIGHT, 42-PIN PLUG), PIN 5, NOTE #5 |
DOMELIGHT
SUPERVISION |
BLUE (-) |
@ RAM, (RIGHT, 16-PIN PLUG), PIN 6, NOTE #5 |
TRUNK RELEASE |
YELLOW/BLACK (-) Power Tailgate |
@ OVERHEAD CONSOLE SWITCH or IPM, (TOP LEFT, 42-PIN PLUG), PIN 16, NOTE #2 |
SLIDING
POWER DOOR |
WHITE (-) |
@ OVERHEAD CONSOLE SWITCH or IPM, (TOP LEFT, 42-PIN PLUG), PIN 8, NOTE #2 |
HORN |
YELLOW (-) |
@ HORN SWITCH or IPM, (TOP LEFT, 42-PIN PLUG), PIN 32, NOTE #2 |
TACH |
Any wire NOT ORANGE (AC) |
@ Any FUEL-INJECTOR |
WAIT TO
START LIGHT |
N/A |
|
BRAKE |
WHITE (+) |
@ BRAKE PEDAL SWITCH or in DRIVERS KICK PANEL, HARNESS to REAR of VEHICLE |
FACTORY
ALARM DISARM |
Use UNLOCK wire |
|
ANTI-THEFT |
HYUNDAI'S TRANSPONDER ANTI-THEFT SYSTEM, See NOTE #1 |
@ IGNITION SWITCH TUMBLER |
EXTRA
INFORMATION |
NOTE #1: This vehicle May Be Equipped with HYUNDAI'S TRANSPONDER ANTI-THEFT SYSTEM,
check the OWNERS MANUAL for this vehcile or contact your HYUNDAI Dealer to see if
the vehicle has a Special programmed Ignition Key, if it does, then for REMOTE
STARTING you will need the 791 BYPASS Module and an Extra Ignition key.
To Order the 791 go to the SECURITY BYPASS MODULE Page on this website.
NOTE #2: the IPM, (Instrument Panel Module) is part of the FUSE BOX, under the DRIVERS
SIDE DASH.
NOTE #3: the DDM, (Drivers Door Module) is located in the DRIVERS DOOR and is part of the
POWER WINDOW SWITCH.
NOTE #4: the RAM, (Rear Area Module) is part of the FUSE BOX, on the DRIVERS SIDE of the
CARGO AREA.
NOTE #5: TEST this wire while Turning the KEY in the DRIVERS DOOR.
|
|
|
|
|