Vehicle
Wiring Details for your
2007-2010 Ford Sport Trac Wiring Diagram |
Printer Friendly
Version |
|
|
Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 2007-2010 Ford Sport Trac . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
|
|
|
 |
| PART |
COLOR |
LOCATION |
| 12 VOLT
CONSTANT |
RED (+) |
@ SJB, PLUG (E), PIN 32, SEE NOTE #2 |
| STARTER |
BLUE/WHITE (+) |
@ IGNITION SWITCH, 7-PIN PLUG, PIN 7 |
| STARTER
2 |
N/A |
|
| IGNITION
1 |
WHITE/ORANGE (+) |
@ IGNITION SWITCH, 7-PIN PLUG, PIN 1 |
| IGNITION
2 |
N/A |
|
| IGNITION
3 |
N/A |
|
| ACCESSORY/HEATER
BLOWER 1 |
PURPLE/GREEN (+) |
@ IGNITION SWITCH, 7-PIN PLUG, PIN 6 |
| ACCESSORY/HEATER
BLOWER 2 |
N/A |
|
| KEYSENSE |
N/A |
|
| PARKING
LIGHTS ( - ) |
N/A |
|
| PARKING
LIGHTS ( + ) |
BLUE/WHITE (+) |
IN DRIVERS KICK or SJB, PLUG (A), PIN 11, SEE NOTE #2 |
| POWER LOCK |
GRAY/YELLOW (TYPE B) |
IN DRIVERS KICK or SJB, PLUG (B), PIN 27, SEE NOTE #2 |
| POWER UNLOCK |
PURPLE/GRAY (TYPE B) |
IN DRIVERS KICK or SJB, PLUG (B), PIN 26, SEE NOTE #2 |
| DOOR TRIGGER |
GREEN/PURPLE (-) |
IN DRIVERS KICK or SJB, PLUG (B), PIN 17, SEE NOTE #2 |
| DOMELIGHT
SUPERVISION |
YELLOW/GRAY (+) |
IN DRIVERS KICK or SJB, PLUG (A), PIN 8, SEE NOTE #2 |
| TRUNK RELEASE |
N/A |
|
| SLIDING
POWER DOOR |
N/A |
|
| HORN |
BLUE/WHITE (-) |
@ HORN SWITCH or SJB, PLUG (C), PIN 6, SEE NOTE #2 |
| TACH |
Any wire NOT PURPLE (AC) |
@ ANY FUEL-INJECTOR |
| WAIT TO
START LIGHT |
N/A |
|
| BRAKE |
PURPLE/WHITE (+) |
@ BRAKE PEDAL SWITCH |
| FACTORY
ALARM DISARM |
N/A |
|
| ANTI-THEFT |
FORDS TRANSPONDER SYSTEM, SEE NOTE #1 |
@ IGNITION SWITCH TUMBLER |
| EXTRA
INFORMATION |
| NOTE #1: This vehicle is equipped with a Special Anti-theft key, to remote start you will need a
Bypass module 791,(use this module IF you have a extra ignition key to place inside
the 791 to remote start, if you do not have an extra key to use or wish not to have a
key placed inside this bypass module, we OFFER a KEYLESS INTERFACE BYPASS
MODULE that does not require a key to be placed inside the bypass modlue, this is
Part # PKALL or PKFM, either one will work, to order, go to the INTERFACE BYPASS
MODULE PAGE on this website.
NOTE #2: The SJB, (SMART JUNCTION BOX) is part of the RELAY/FUSEBOX, Under the Drivers
Side of the Dash.
|
|
|
|
|
|
