Vehicle
Wiring Details for your
2007-2009 Subaru Legacy Wiring Diagram |
Printer Friendly
Version |
|
|
Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 2007-2009 Subaru Legacy . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
|
|
|
 |
| PART |
COLOR |
LOCATION |
| 12 VOLT
CONSTANT |
WHITE (+) 50 AMP |
@ IGNITION SWITCH, (WHITE, 6-PIN PLUG), PIN 3 |
| STARTER |
WHITE/BLACK (+) |
@ IGNITION SWITCH, (WHITE, 6-PIN PLUG), PIN 2 |
| STARTER
2 |
N/A |
|
| IGNITION
1 |
GREEN (+) |
@ IGNITION SWITCH, (WHITE, 6-PIN PLUG), PIN 1 |
| IGNITION
2 |
BLUE (+) |
@ IGNITION SWITCH, (WHITE, 6-PIN PLUG), PIN 4 |
| IGNITION
3 |
N/A |
|
| ACCESSORY/HEATER
BLOWER 1 |
YELLOW (+) |
@ IGNITION SWITCH, (WHITE, 6-PIN PLUG), PIN 5 |
| ACCESSORY/HEATER
BLOWER 2 |
N/A |
|
| KEYSENSE |
N/A |
|
| PARKING
LIGHTS ( - ) |
BLACK/WHITE (-) |
@ LIGHTING SWITCH, (WHITE, 17-PIN PLUG), PIN 14 |
| PARKING
LIGHTS ( + ) |
ORANGE (+) |
@ PARKING LIGHT SWITCH, (WHITE, 4-PIN PLUG), PIN 4 |
| POWER LOCK |
BROWN/WHITE (-), TYPE B |
in DRIVERS KICK PANEL or BIU, (GRAY, 35-PIN PLUG), PIN 15, NOTE #2 |
| POWER UNLOCK |
BROWN/BLACK (-), TYPE B |
in DRIVERS KICK PANEL or BIU, (GRAY, 35-PIN PLUG), PIN 29, NOTE #2 |
| DOOR TRIGGER |
BLUE/WHITE (-) |
in DRIVERS KICK PANEL or BIU, (GRAY, 35-PIN PLUG), PIN 19, NOTE #2 |
| DOMELIGHT
SUPERVISION |
BROWN (-) |
in PASSENGER A Pillar or BIU, (WHITE, 30-PIN PLUG), PIN 3, NOTE #2 |
| TRUNK RELEASE |
Use Trunk Release Motor |
|
| SLIDING
POWER DOOR |
N/A |
|
| HORN |
BROWN to RED/WHITE (-) |
@ HORN SWITCH or BIU, (WHITE, 30-PIN PLUG), PIN 11, NOTE #2 |
| TACH |
Any wire NOT BLUE/BLACK, RED or YELLOW/BLUE (AC) |
@ Any FUEL-INJECTOR |
| WAIT TO
START LIGHT |
N/A |
|
| BRAKE |
BROWN/WHITE to BROWN (+) |
@ BRAKE PEDAL SWITCH or BIU, (WHITE, 28-PIN PLUG), PIN 23, NOTE #2 |
| FACTORY
ALARM DISARM |
YELLOW/RED (-), NOTE #3 |
in DRIVERS KICK PANEL or BIU, (GRAY, 35-PIN PLUG), PIN 12, NOTE #2 |
| ANTI-THEFT |
SUBARU'S TRANSPONDER ANTI-THEFT SYSTEM, Requires Bypass Module, See NOTE #1 |
@ IGNITION SWITCH TUMBLER |
| EXTRA
INFORMATION |
| NOTE #1: SUBARU'S TRANSPONDER ANTI-THEFT SYSTEM, Requires Bypass Module,
Part # 791 Bypass Module (for REMOTE STARTING ONLY!)
Part # DLPK-CANBUS MULTI (for REMOTE START/DOOR LOCKS)
NOTE #2: the BIU, (Body Integrated Unit) is located under the DRIVERS DASH, and to the
RIGHT of the STEERING COLUMN.
NOTE #3: TEST this wire while TURNING the KEY in the Drivers Door.
|
|
|
|
|
|
