Vehicle
Wiring Details for your
2007-2009 Kia Amanti Wiring Diagram |
Printer Friendly Version |
|
|
Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 2007-2009 Kia Amanti . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
|
|
|
 |
PART |
COLOR |
LOCATION |
12 VOLT
CONSTANT |
PINK (+) |
@ IGNITION SWITCH, (6-PIN PLUG), PIN 5 |
STARTER |
YELLOW (+) |
@ IGNITION SWITCH, (6-PIN PLUG), PIN 1 |
STARTER
2 |
N/A |
|
IGNITION
1 |
GREEN (+) |
@ IGNITION SWITCH, (6-PIN PLUG), PIN 6 |
IGNITION
2 |
N/A |
|
IGNITION
3 |
N/A |
|
ACCESSORY/HEATER
BLOWER 1 |
BLUE (+) |
@ IGNITION SWITCH, (6-PIN PLUG), PIN 3 |
ACCESSORY/HEATER
BLOWER 2 |
ORANGE (+) |
@ IGNITION SWITCH, (6-PIN PLUG), PIN 4 |
KEYSENSE |
N/A |
|
PARKING
LIGHTS ( - ) |
WHITE/ORANGE to WHITE BLACK (-) |
@ FUSE BOX, (FRONT, 18-PIN PLUG), PIN 1 or BCM, (26-PIN PLUG), PIN 10, NOTE #2 |
PARKING
LIGHTS ( + ) |
BROWN(+)(Left) and ORANGE(+)(Right(+), use both! |
in DRIVERS KICK PANEL or FUSE BOX, (FRONT, 14-PIN PLUG), PINS 7 and 1 |
POWER LOCK |
WHITE/ORANGE or RED/ORANGE (TYPE B), NOTE #3 |
in DRIVERS KICK PANEL, (WHITE, 18-PIN PLUG), PIN 17 or BCM, (16-PIN PLUG), PIN 15, NOTE #2 |
POWER UNLOCK |
RED/ORANGE (TYPE B), Requires Double Pulse, NOTE #3 |
@ POWER WINDOW MAIN SWITCH, (20-PIN PLUG), PIN 19 |
DOOR TRIGGER |
GREEN (-) |
@ FUSE BOX,(FRONT, 30-PIN PLUG), PIN 3 or BCM, (16-PIN PLUG), PIN 16, NOTE #2 |
DOMELIGHT
SUPERVISION |
GREEN to YELLOW/ORANGE (-) |
@ FUSE BOX,(FRONT, 30-PIN PLUG), PIN 4 or BCM, (14-PIN PLUG), PIN 2, NOTE #2 |
TRUNK RELEASE |
PINK (-), NOTE #4 |
in DRIVERS KICK PANEL, (BLACK, 20-PIN PLUG), PIN 17 or BCM, (16-PIN PLUG), PIN 7, NOTE #2 |
SLIDING
POWER DOOR |
N/A |
|
HORN |
GREEN/ORANGE to PINK/BLACK (-) |
@ FUSE BOX, (FRONT, 26-PIN PLUG), PIN 1 or BCM, (22-PIN PLUG), PIN 21, NOTE #2 |
TACH |
Any wire NOT ORANGE (AC) |
@ Any FUEL-INJECTOR |
WAIT TO
START LIGHT |
N/A |
|
BRAKE |
GRAY (+) |
in DRIVERS KICK PANEL, (BLACK, 20-PIN PLUG), PIN 4 or BCM, (14-PIN PLUG), PIN 6, NOTE #2 |
FACTORY
ALARM DISARM |
Use UNLOCK wires |
|
ANTI-THEFT |
KIA'S TRANSPONDER ANTI-THEFT SYSTEM, See NOTE #1 |
@ IGNITION SWITCH TUMBLER |
EXTRA
INFORMATION |
NOTE #1: This vehicle May Be Equipped with KIA'S TRANSPONDER ANTI-THEFT SYSTEM,
check the OWNERS MANUAL for this vehcile or contact your HYUNDAI Dealer to see if
the vehicle has a Special programmed Ignition Key, if it does, then for REMOTE
STARTING you will need the 791 BYPASS Module and an Extra Ignition key.
To Order the 791 go to the SECURITY BYPASS MODULE Page on this website.
NOTE #2: the BCM, (Body Control Module) is located under the DRIVERS DASH, behind the
FUSE BOX.
NOTE #3: TEST these wires while Turning the KEY in the DRIVERS DOOR. It may be necessary
to use the LOCK/UNLOCK DETECTION wire, GREEN (-) at the POWER WINDOW MAIN
SWITCH, ( 20-PIN PLUG), PIN 17
NOTE #4: TEST this wire while Opening the TRUNK with the Handle on the REAR of the Vehicle.
|
|
|
|
|