Vehicle
Wiring Details for your
2007-2008 Infiniti G35 Wiring Diagram |
Printer Friendly Version |
|
|
Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 2007-2008 Infiniti G35 . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
|
|
|
|
PART |
COLOR |
LOCATION |
12 VOLT
CONSTANT |
WHITE (+) |
BLACK 3-PIN PLUG, PIN 1, @ BCM, See NOTE #2 |
STARTER |
BROWN (-) |
@ PUSH-BUTTON Start Switch or BLACK 40-PIN PLUG, PIN 18 @ BCM, See NOTE #2 |
STARTER
2 |
LT.BLUE (-) |
GRAY 40-PIN PLUG, PIN 21, @ BCM, See NOTE #2 |
IGNITION
1 |
RED (+) |
BLACK 40-PIN PLUG, PIN 11, @ BCM, See NOTE #2 |
IGNITION
2 |
YELLOW (-) |
GRAY 40-PIN PLUG, PIN 16, @ BCM, See NOTE #2 |
IGNITION
3 |
N/A |
|
ACCESSORY/HEATER
BLOWER 1 |
ORANGE (+) |
BLACK 40-PIN PLUG, PIN 31, @ BCM, See NOTE #2 |
ACCESSORY/HEATER
BLOWER 2 |
ORANGE (+) |
BLACK 40-PIN PLUG, PIN 24, @ BCM, See NOTE #2 |
KEYSENSE |
LT.BLUE or RED (+) |
GREEN 40-PIN PLUG, PIN 10, @ BCM, See NOTE #2 |
PARKING
LIGHTS ( - ) |
N/A |
|
PARKING
LIGHTS ( + ) |
RED (+) |
WHITE 10-PIN PLUG, PIN 8 @ DASH FUSEBOX |
POWER LOCK |
PURPLE (TYPE B), See NOTE #3 |
WHITE 16-PIN PLUG, PIN 4 @ POWER WINDOW MAIN SWITCH |
POWER UNLOCK |
YELLOW (TYPE B), Requires Double Pulse, See NOTE #4 |
WHITE 16-PIN PLUG, PIN 6 @ POWER WINDOW MAIN SWITCH |
DOOR TRIGGER |
RED or GRAY (-) |
GREEN 40-PIN PLUG, PIN 39 @ BCM, See NOTE #2 |
DOMELIGHT
SUPERVISION |
PURPLE (-) |
WHITE 16-PIN PLUG, PIN 16 @ BCM, See NOTE #2 |
TRUNK RELEASE |
GRAY (-) |
GRAY 40-PIN PLUG, PIN 36 @ BCM, See NOTE #2 |
SLIDING
POWER DOOR |
N/A |
|
HORN |
GREEN or LT.GREEN (-) |
@ HORN SWITCH, GRAY 8-PIN PLUG, PIN 8 |
TACH |
Any wire NOT PINK (AC) |
@ Any FUEL-INJECTOR |
WAIT TO
START LIGHT |
N/A |
|
BRAKE |
BROWN or PINK (+) |
REEN 40-PIN PLUG, PIN 7 @ BCM, See NOTE #2 |
FACTORY
ALARM DISARM |
N/A |
|
ANTI-THEFT |
INFINITI'S TRANSPONDER ANTI-THEFT SYSTEM, Requires Bypass Module, See NOTE #1 |
|
EXTRA
INFORMATION |
NOTE #1 This vehicle is Equipped with a TRANPONDER ANTI-THEFT System that will requires a Bypass Module for REMOTE STARTING:
Part # 791 Bypass Module will work IF you have another IGNITION key that you can give up, this key will need to be placed inside the 791 Bypass Module and be left there for Remote Starting.
Part # DB-ALL or XK09 is a Keyless Bypass Module used for Remote Starting that DOES NOT require a Key to be left inside the bypass module. To order go to the INTERFACE BYPASS MODULE PAGE on this website.
NOTE #2: The BCM is located in the PASSENGER KICK.
NOTE #3: TEST this wire while LOCKING the Vehicle with the Key in the Drivers Door Key
Cylinder.
NOTE #4: TEST this wire while UNLOCKING the Vehicle with the Key in the Drivers Door Key
Cylinder.
|
|
|
|
|