NOTE #1: This Vehicle is Equipped with CHRYSLERS MULTIPLEX IGNITION/ANTI-THEFT SYSTEM
that requires a INTERFACE BYPASS MODULE Part # DB-ALL or XK09 for REMOTE
STARTING and for the KEYLESS ENTRY, when using the Interface Bypass the Resistors
for the Door Locks is no longer needed, either of these Modules will work for this
vehicle, to order go to the INTERFACE BYPASS MODULE Page on this website.
NOTE #2: THE LEFT FRONT DOOR IS PURPLE IN PIN 1. THE RIGHT FRONT DOOR IS
PURPLE/WHITE IN PIN 4. THE LEFT REAR DOOR IS PURPLE/ORANGE OR
PURPLE /GRAY IN PIN 2. THE REAR DOOR IS PURPLE/YELLOW OR TAN /YELLOW
IN PIN 3. USE ALL 4 WIRES AND DIODE ISOLATE EACH WIRE FROM EACH OTHER
AND THE INSTRUMENT CLUSTER.
NOTE #3: THE PCM IS ON THE PASSENGER SIDE FIRE WALL .
NOTE #4: DOORLOCKS ARE 1-WIRE TYPE ...UNLOCK REQUIRES NEGATIVE(-) PULSE THRU A
330 OHM(1/2 WATT) RESISTOR....LOCK RQUIRES A NEGATIVE(-) PULSE THRU 820
OHMS...you cant buy an 820 ohm resistor so make one by using a 4700 ohm and a
1000 ohm in parallel......OR.......SEE NOTE #1
|