Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 2007 -2008 Suzuki Sx4 (without Smart Key) . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
PART
COLOR
LOCATION
12 VOLT
CONSTANT
WHITE/BLUE (+)
IGNITION SWITCH HARNESS
STARTER
GREEN/WHITE (+)
IGNITION SWITCH HARNESS
STARTER
2
N/A
N/A
IGNITION
1
GREEN (+)
IGNITION SWITCH HARNESS
IGNITION
2
N/A
N/A
IGNITION
3
N/A
N/A
ACCESSORY/HEATER
BLOWER 1
YELLOW (+)
IGNITION SWITCH HARNESS
ACCESSORY/HEATER
BLOWER 2
N/A
N/A
KEYSENSE
BLUE/YELLOW (+)
IGNITION SWITCH HARNESS
PARKING
LIGHTS ( - )
RED/YELLOW (-)
AT MODULE BELOW STEERING COLUMN
PARKING
LIGHTS ( + )
RED/YELLOW (+)
LOW IN DRIVERS KICK PANEL
POWER LOCK
GRAY/WHITE(-)Negative (-)
IN DRIVERS KICK PANEL
POWER UNLOCK
GRAY/RED(-)Negative (-)
IN DRIVERS KICK PANEL
DOOR TRIGGER
NOTE *
IN DRIVERS KICK PANEL
DOMELIGHT
SUPERVISION
WHITE (-) (REQUIRES #R30-H RELAY)
IN DRIVERS KICK PANEL
TRUNK RELEASE
N/A
N/A
SLIDING
POWER DOOR
N/A
N/A
HORN
BLUE (-)
AT STEERING COLUMN HARNESS
TACH
N/A
N/A
WAIT TO
START LIGHT
N/A
N/A
BRAKE
GREEN/WHITE (+)
AT SWITCH ABOVE BRAKE PEDAL OR DRIVERS KICK PANEL
FACTORY
ALARM DISARM
N/A
N/A
ANTI-THEFT
TRANSPONDER ANTI-THEFT
TRANSPONDER @ IGNITION SWITCH TUMBLER
EXTRA
INFORMATION
NOTE * THE DRIVERS DOOR IS BLACK/RED (-). ALL OTHER DOORS ARE BLUE/BLACK (-). USE BOTH WIRES AND DIODE ISOLATE BOTH.
