Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 2007 - Kia Sorento . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
PART
COLOR
LOCATION
12 VOLT
CONSTANT
GREEN (+) OR BLUE (+)
IGNITION SWITCH HARNESS
STARTER
ORANGE (+)
IGNITION SWITCH HARNESS
STARTER
2
N/A
N/A
IGNITION
1
YELLOW (+)
IGNITION SWITCH HARNESS
IGNITION
2
N/A
N/A
IGNITION
3
N/A
N/A
ACCESSORY/HEATER
BLOWER 1
WHITE (+)
IGNITION SWITCH HARNESS
ACCESSORY/HEATER
BLOWER 2
ORANGE (+)
IGNITION SWITCH HARNESS
KEYSENSE
YELLOW/ORANGE (+) SEE NOTE *
AT BCM
PARKING
LIGHTS ( - )
N/A
N/A
PARKING
LIGHTS ( + )
RED (+)
LOW IN DRIVERS KICK PANEL
POWER LOCK
GREEN/BLACK (-) TYPE
IN DRIVERS KICK PANEL
POWER UNLOCK
BLUE/BLACK (-) TYPE
IN DRIVERS KICK PANEL
DOOR TRIGGER
BLUE (-)
AT BCM
DOMELIGHT
SUPERVISION
USE DOOR TRIGGER
TRUNK RELEASE
RED/ORANGE (-)
BEHIND TRUNK RELEASE SWITCH
SLIDING
POWER DOOR
N/A
N/A
HORN
BLUE/BLACK (-)
AT BCM
TACH
WHITE SEE NOTE **
AT ECM MODULE
WAIT TO
START LIGHT
N/A
N/A
BRAKE
WHITE (+)
AT SWITCH ABOVE BRAKE PEDAL
FACTORY
ALARM DISARM
N/A
N/A
ANTI-THEFT
TRANSPONDER ANTI-THEFT
TRANSPONDER @ IGNITION SWITCH TUMBLER
EXTRA
INFORMATION
NOTE * THE BCM IS LOCATED BEHIND THE HEATER/AC CONTROLS MOUNTED VERTICALLY WITH PLUGS FACING DOWN.
NOTE ** THE ECM MODULE IS LOCATED UNDERHOOD CLOSE TO THE FIREWALL ON PASSENGER FENDERWELL.
