Vehicle
Wiring Details for your
2006-2011 Suzuki Grand Vitara Wiring Diagram |
Printer Friendly Version |
|
|
Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 2006-2011 Suzuki Grand Vitara . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
|
|
|
 |
PART |
COLOR |
LOCATION |
12 VOLT
CONSTANT |
WHITE/RED (+) 50 AMP |
@ IGNITION SWITCH, (6-PIN PLUG), PIN 3 |
STARTER |
BLACK/YELLOW (+) |
@ IGNITION SWITCH, (6-PIN PLUG), PIN 2 |
STARTER
2 |
N/A |
|
IGNITION
1 |
BLACK/YELLOW (+) |
@ IGNITION SWITCH, (6-PIN PLUG), PIN 6 |
IGNITION
2 |
N/A |
|
IGNITION
3 |
N/A |
|
ACCESSORY/HEATER
BLOWER 1 |
YELLOW (+) |
@ IGNITION SWITCH, (6-PIN PLUG), PIN 1 |
ACCESSORY/HEATER
BLOWER 2 |
BLUE (+) |
@ IGNITION SWITCH, (6-PIN PLUG), PIN 5 |
KEYSENSE |
N/A |
|
PARKING
LIGHTS ( - ) |
RED/BLUE (-) |
@ HEADLIGHT SWITCH or BCM, (24-PIN PLUG), PIN 11, NOTE #2 |
PARKING
LIGHTS ( + ) |
RED/YELLOW (+) |
in DRIVERS KICK or FUSE BOX, (20-PIN PLUG), PIN 4 |
POWER LOCK |
PINK/BLACK (-), TYPE B |
in DRIVERS KICK PANEL or BCM, (40-PIN PLUG), PIN 27, NOTE #2 |
POWER UNLOCK |
PINK/GREEN or WHITE/GREEN (-), TYPE B |
in DRIVERS KICK PANEL or BCM, (40-PIN PLUG), PIN 26, NOTE #2 |
DOOR TRIGGER |
BLACK/ORANGE (-) |
in DRIVERS KICK PANEL or BCM, (40-PIN PLUG), PIN 39, NOTE #2 |
DOMELIGHT
SUPERVISION |
BLACK/RED (-) |
@ FUSE BOX, (16-PIN PLUG), PIN 9 or BCM, (15-PIN PLUG), PIN 15, NOTE #2 |
TRUNK RELEASE |
Use RELEASE Motor wire |
|
SLIDING
POWER DOOR |
N/A |
|
HORN |
BLUE (-) |
@ HORN SWITCH or BCM, (40-PIN PLUG), PIN 15, NOTE #2 |
TACH |
ANY wire NOT BLUE/BLACK |
@ Any FUEL-INJECTOR |
WAIT TO
START LIGHT |
N/A |
|
BRAKE |
GREEN/WHITE (+) |
@ BRAKE PEDAL SWITCH or in DRIVERS KICK PANEL, Harness to REAR of Vehicle |
FACTORY
ALARM DISARM |
PINK/BLUE (-), Requires Double Pulse |
in DRIVERS KICK PANEL or BCM, (40-PIN PLUG), PIN 36, NOTE #2 |
ANTI-THEFT |
SUZUKI'S TRANSPONDER ANTI-THEFT SYSTEM, Requires Bypass Module, See NOTE #1 |
@ IGNITION SWITCH TUMBLER |
EXTRA
INFORMATION |
NOTE #1: SUZUKI'S TRANSPONDER ANTI-THEFT SYSTEM, Requires Bypass Module,
Part # 791Bypass Module for REMOTE START
NOTE #2: the BCM (Body Control Module) is located Under the DRIVERS DASH and to the
LEFT of the FUSE BOX.
|
|
|
|
|