NOTE #1: This vehicle requires a speciall INFERFACE BYPASS MODULE for REMOTE STARTING PART # DB-ALL or XK09 BYPASS MODULE, to order either module go to the INTERFACE BYPASS MODULE Page on this website.
NOTE #2: This vehicle uses a 1-Wire Door Locking System, the LOCK requires a (-) Negative thru a 330 Ohm resistor the UNLOCK requires a (-) Negative thru a 100 Ohm resistor. Some units will also require extra relays Part 778 to connect See DIAGRAMS.
NOTE #3; The DRIVERS DOOR is a PURPLE (-) at Pin 6, the PASSENGER DOOR is a PURPLE/WHITE (-) Pin 7, the DRIVERS REAR DOOR is a PURPLE/GRAY (-) Pin 4 and the PASSENGER REAR DOOR is a PURPLE/YELLOW Pin 5 when connecting to an ALARM SYSTEM use all 4 wires ans DIODE ISOLATE See DIAGRAM
NOTE #4: TEST this wire while opening the REAR GLASS from the SWITCH on the REAR HATCH
NOTE #5: The IPM (Integrated Power Module) is located on the DRIVERS FENDER, behind the BATTERY
|