NOTE *1 The MICU (Multiiplex Integrated Control Unit) is attached to the FUSE/RELAY BOX, the Plugs for this unit are on the LEFT SIDE of the FUSE BOX.
NOTE *2 TEST the LOCK and UNLOCK wires using the PASSENGER DOOR LOCK/UNLOCK Switch.
NOTE *3 The DRIVERS DOOR is a LIGHT GREEN (-) at the 16-Pin Plug, Pin 15 , the PASSENGER DOOR is a LIGHT GREEN (-) in a LIGHT GREEN 14-Pin Plug, Pin 12, the DRIVERS REAR DOOR is a PURPLE (-) in a LIGHT GREEN 16-Pin Plug, Pin 14 and the PASSENGER REAR DOOR is a WHITE (-) in a LIGHT GREEN 14-Pin Plug, Pin 13. When connecting to an ALARM SYSTEM use all 4 wires and DIODE ISOLATE, See DIAGRAM
NOTE #4: HONDA'S TRANSPONDER SYSTEM, Requires Bypass Module:
(For Remote Starting Only) Part #791 Bypass, (Requires Extra Key) for Operation.
(For Remote Starting/Door Locks) Part # DB-ALL (No Extra Key Required for Operation)
1-KEY Required for Programming.
To order please go to the SECURITY BYPASS MODULE Page or INTERFACE BYPASS
MODULE Page on this website.
|