| NOTE *1 the BECU (Body Electronic Control Unit) is located behind the GLOVE BOX, and is the Module to the RIGHT.
NOTE *2 THIS VEHICLE REQUIRES A SPECIAL DOOR LOCK DIAGRAM THAT REQUIRES AN EXTRA RELAY PART #R30-H AND A 1 AMP DIODE, TO CONNECT, See DIAGRAM, The DRIVERS side LOCK/UNLOCK wires are at the DRIVERS DOOR MODULE in the DRIVERS DOOR, they are: LOCK is a GREEN, Pin 4, UNLOCK is a YELLOW, Pin 14 and LOCK DETECTION ia s BROWN, Pin 16. The PASSENGER side LOCK/UNLOCK wires are at the BECU, 2ND Plug down from the top: the LOCK is a PURPLE, Pin 8, the UNLOCK is a LIGHT BLUE, Pin 13 and the LOCK DETECTION is a BROWN, Pin 11
NOTE *3 the DRIVERS DOOR TRIGGER is a BLACK (-) 3RD Plug down, Pin 11, the PASSENGER DOOR TRIGGER is a LIGHT BLUE (-) Bottom Plug, Pin 16, the DRIVERS REAR DOOR TRIGGER is a GREEN (-) TOP Plug, Pin 15, and the PASSENGER REAR DOOR TRIGGER is a GREEN (-) Bottom Plug, Pin 15, When connecting to an Alarm System, use all 4 wires and DIODE ISOLATE, See DIAGRAM
NOTE *4 the DOME LIGHT SUPERVISION wire is also a BROWN (-) at the BECU, Bottom Plug, Pin 11
|