| NOTE *1 the IPM ( Instrument Panel Module) is attached to the FUSEBOX under the DRIVERS SIDE of the DASH.
NOTE *2 to LOCK use the ORANGE (-) FACTORY ALARM ARM wire located at the Power Window switch in the Drivers Door, to UNLOCK use the UNLOCK MOTOR wire PINK (5 Wire Reverse Polarity) wire located at the Drivers Power window switch Connector 1 Pin 4, this will UNLOCK ONLY the Drivers door. To UNLOCK the other doors, use a Double pulse on the Factory Disarm wire a RED (-) wire at the Drivers Power window switch Connector 2 Pin 1, test this wire, it will show GROUND when you UNLOCK with the Key in the Drivers door.
NOTE *3 the DDM (Drivers Door Module) is attached to the Power Window switch in the drivers door.
NOTE *4 the RAM (Rear Area Module) is attached to the FUSEBOX in the Drivers Side of the Cargo Area.
|